ARTHUR HOLM DynamicTabLift Manual do utilizador - Página 14

Procurar online ou descarregar pdf Manual do utilizador para Sistemas de elevação ARTHUR HOLM DynamicTabLift. ARTHUR HOLM DynamicTabLift 20 páginas.

AHlink

AHlink is used to control and set-up the unit.

By default, the AHlink wireless signal is deactivated. To activate it,

please press and hold simultaneously the Open and Close buttons on

the cover plate for 5 seconds.

You can also activate the AHlink wireless signal by using the Interactive

Setup Display (ISD) located below the monitor. Press successively the

Down arrow until the AHlink appears on the LCD screen. Then, press the

OK button and you will hear a 5 Beep sound. This means that the AHlink

is active.

The

wireless

automatically deactivates when

there is no device connected

during more than 2 minutes.

When the AHlink deactivates,

you will hear a long Beep sound.

To control and set up your AH

product

with

download it from the App Store

(IOS system) or from Google Play

(Android system) and execute it

in your handled device.

It is recommended on to select

Auto Connect and select Portrait

on Orientation. To connect it,

select Scan for local devices.

AHlink

signal

AHlink,

please