Acova 874110 Manual de instruções de utilização - Página 13

Procurar online ou descarregar pdf Manual de instruções de utilização para Aquecedor Acova 874110. Acova 874110 20 páginas.

Imprimir página

Acova 874110 Manual de instruções de utilização

1.3 Overview of your appliance

ELECTRICAL TOWEL DRYER OR RADIATOR:

This heating appliance is filled with a precise quantity

of specific oil. Any repair work requiring the oil tank to be

opened should only be carried out by the manufacturer or

their after-sales service department, which should also be

contacted in the event of an oil leak.

When disposing of the heating appliance, comply with

the regulations in force on the disposal of oil.

This electrical appliance with circulating fluid is delivered ready to use.

It is plugged and filled with a high-performance thermal mineral oil before

leaving the factory.

This fluid was specially designed for this use and requires no special mainte-

nance.

As soon as the appliance is switched on, you will notice certain differences

compared to a standard electric heating system:

- the electric heating element heats the fluid, which gradually and naturally

starts circulating in your appliance;

- the properties of the fluid are such that it takes approximately ten minutes for

the radiator to reach its optimum surface temperature, depending on the model and the

room temperature when the appliance is switched on;

- this principle also ensures consistent and sustained heating even when the

element is no longer powered.

DUAL-ENERGY TOWEL DRYER:

This appliance is designed for connection to the central heating system and

comes unplugged.

2. Installing your appliance

2.1 Warnings

The flexible cable supplied with your appliance is desig-

ned to be connected to the mains via a junction box that must

be placed behind the appliance, with no need for a plug.

In a kitchen or bathroom, the junction box must be

positioned at least 25 cm from the floor.

The appliance must be installed as described in this

document and in accordance with the applicable European

and French standards, including CEI 60364.7.701 and NF

C15-100, as well as the rules of good professional practice.

For other countries (apart from France), the appliance

must be installed in accordance with standards in force and

with rules of good professional practice in the country of use.

IMPORTANT The example shown only concerns a

bathtub. For other bathroom fixtures, please consult

your installer.

IMPORTANT The system must be fitted with an omni-

polar circuit-breaker with a minimum contact opening of

3mm.

40005972