dji Phantom 4 RTK Manual de Perguntas Frequentes - Página 7

Procurar online ou descarregar pdf Manual de Perguntas Frequentes para Quadricópteros dji Phantom 4 RTK. dji Phantom 4 RTK 17 páginas. Remote controller
Também para dji Phantom 4 RTK: Manual de início rápido (10 páginas), Exoneração de responsabilidade e manuais de segurança (19 páginas), Manual de configuração (7 páginas)

1. DJI Base Station: Connect DJI D-RTK 2 High-Precision GNSS Mobile Station and the

remote controller via a USB cable to upload the PPK data onto the base station. After

the server acquires the data from the aircraft and the D-RTK 2 Mobile Station, it will

start PPK calculation automatically.

2. RINEX Base Station: Convert the satellite observation values received by third-party

base stations into standard RINEX format, then import the PPK source data to the

remote controller and upload them to the cloud server for PPK calculation.

In which SD cade file folder should the third-party satellite observation data be stored

when I use a RINEX base station for PPK calculation? Where will the PPK calculation

results be stored? You should save the third-party satellite observation data under sd

card/third_base/ on the SD card in the remote controller. The PPK results will be stored under

SD card/DCIM/SURVEY/(mission file name)/result.csv.

How does the Cloud PPK Service acquire the geographic coordinate information of

third-party base stations when using a RINEX base station for PPK calculation?

1. If the RINEX file contains a field "APPROX POSITION XYZ", which includes the

approximate location of the base station in the ECEF coordinate system, the Cloud

PPK Service will be able to analyze the location based on information in the field and

convert it into geographic coordinates. These coordinates will be set as the default

coordinates for the phase center of the antenna of the base station.

2. Users can also manually enter the longitude and latitude information of where the

base station is set up, as well as the distance between the bottom of the base station

and the antenna phase center (APC). With this information, the Cloud PPK Service will

run calculations based on the antenna phase center information entered by the user.

3. The Cloud PPK Service can also acquire the location of the antenna phase center

through Single Point Positioning (SPP) with RINEX data. These coordinates will be

used for PPK calculation.

Where is Cloud PPK Service available? The service is available everywhere except in the

US, Canada, Hong Kong SAR, and Macau SAR.

When I use the D-RTK 2 Mobile Station as an RTK rover, where are the coordinate files

stored? You can find them under /DJI/EXPORT/RTK_SCOUT.

How does the RTK rover measure data? There are two ways:

1. Instantaneous measurement

2. Average measurement using 10 values collected during 2 seconds

Does the D-RTK 2 Mobile Station have to have an RTK "FIX" to be used as a rover?

1. For instantaneous measurement: yes, it has to be "FIX".

2. For average measurement: it is recommended that the RTK signal be "FIX".

How do I run firmware updates on the D-RTK 2 Mobile Station? Currently you can only

update it via the Phantom 4 RTK Remote Controller (not the SDK Remote Controller).

Purchase the DJI Phantom 4 RTK w/ RTK-2 Mobile Station Combo at www.tigersupplies.com.