FITNESS AUDIO DWR-2468 Manual de operação - Página 6

Procurar online ou descarregar pdf Manual de operação para Sistema de microfone FITNESS AUDIO DWR-2468. FITNESS AUDIO DWR-2468 12 páginas. 2.4ghz digital true diversity wireless system

Imprimir página

DB-2420 Digital Belt-pack Transmitter

1. LCD

2. Cover release button

3. Channel synchronizing button

4. Menu button

5. Setting button

6. High-impedance gain control (GT)

7. Low-impedance gain control (MT)

8. Battery compartment

9. Power button

10. Audio input connector

11. Charging contacts

Power On

Turn it on by pressing on the POWER button (9) for 2 seconds until the LCD Screen (1) comes

on. Turn it off by pressing the POWER button for 2 seconds until the LCD Screen goes off.

Battery installation

This belt-pack requires 2 x AA batteries to operate. To install, open the battery cover using the

cover release buttons and insert the batteries into the battery compartment.

Note: Batteries contain a corrosive acid that may leak and damage the belt-pack

when stored for a long period. Batteries should be removed from the belt-pack before

storing without use for more than 4 weeks.

CHANNEL / FREQUENCY Changing Transmitter

1. Press-release MENU button until the

CHANNEL-FREQUENCY page appears.

CH:006

►

SET

3. Press-release SET (UP) or MENU (DOWN)

button to select a new channel.

CH:036

►

SET

Wireless Microphone System Operating Manual

2. Press and hold SET button until the channel

number flashes to denote readiness for

setting.

2407

MHz

4. After a channel is chosen, wait about 3

seconds to store the setting.

2437

MHz

CH:006

►

SET

2407

CH:036

2437

MHz