Artic AR-DB16F Manual de instalação - Página 5
Procurar online ou descarregar pdf Manual de instalação para Hardware de rede Artic AR-DB16F. Artic AR-DB16F 10 páginas. Fiber access terminal closure
Imprimir página5.2 The procedure to strip the cable fiber
5.2.1 Mark the cut point on the cable according to the different length requirements.
5.2.2 Strip the cable outer layer.
5.2.3 The requirement for stripping the un-cut cable. （1 ） The length should be no less than
2000mm ； （2） Cut the steel core at the length of 50mm of the cable cutpoint. （Picture3-1).
≥ 2000 mm
50 mm
PICTURE 3-1
Note: Besure not tod a mage fiber. Don't use any damaged cable.
50 mm
≥ 1000 mm
PICTURE 3-2
5.3 Open the closure
5.3.1 Use the tool to pry buckles. （Picture4）
5.3.2 Open the lid, take out the accessories. （Picture5）
5
INSTALLATION MANUAL FIBER ACCESS TERMINAL CLOSURE AR-DB16F