dji RONIN 4D FLEX Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Acessórios para câmaras dji RONIN 4D FLEX. dji RONIN 4D FLEX 20 páginas.

Imprimir página

Disclaimer

Carefully read this entire document and all safe and

lawful practices provided before use.

Introduction

The DJI

RONIN

4D Flex enables the ZENMUSE

gimbal and camera to be used without being mounted

on the main body of DJI Ronin 4D. DJI Ronin Flex supports

Left and Right Hand Grip, High-Bright Main Monitor, DJI

RS Focus Motor (2022), and other accessories, providing

more flexible and lightweight shooting methods.

Gimbal Connector Module (Figure A-1)

1. Power Button

Press once to start/stop recording. Press and hold to

power on/off Ronin 4D.

2. Display Port

Used to connect the High-Bright Main Monitor.

3. Gimbal Ring (with Safety Lock)

For securing the gimbal.

4. Ronin 4D Hand Grip Adapter

For mounting Ronin 4D Left and Right Hand Grips. The

Hand Grip Adapter can be detached by loosening the

screw.

5. CAN Ports (USB-C)

For connecting Ronin 4D Left and Right Hand Grips,

and DJI RS Focus Motor (2022).

6. Cold Shoe

For mounting the High-Bright Main Monitor. The cold

shoe can be detached, and the 1/4"-20 screw holes

can be used to mount other accessories.

7. 1/4"-20 Screw Hole

For mounting accessories such as a tripod or unipod.

8. 3/8"-16 Screw Hole

For mounting accessories such as a tripod or unipod.

Main Body Connector Module (Figure A-2)

Installation

Attaching the Main Body Connector Module

(Figure B)

To attach the main body connector module, align the

red marks of the main body connector module and the

gimbal connector of Ronin 4D

module, and rotate clockwise until it clicks to indicate the

main body connector module is locked

gimbal ring

Attaching the Gimbal Connector Module (Figure C)

Make sure the safety lock of the Ronin 4D Flex is in the

unlocked position

. To attach the gimbal connector

module, align the red marks of the gimbal connector

, insert the connector

. Tighten the

module, gimbal ring, and the gimbal connector, insert the

gimbal

and rotate gimbal ring counter-clockwise

Toggle the safety lock to the locked position

Attaching the Left and Right Hand Grip (Figure D)

Make sure the lever of the left hand grip is in the unlocked

position

. Insert the left hand grip into the hand grip

adapter on the gimbal connector module

and then push the lever all the way down

right hand grip following the same instructions.

• Make sure the hand grips are firmly mounted.

Attaching the High-Bright Main Monitor (Figure E)

Attach the high-bright main monitor to the cold shoe of the

gimbal connector module and tighten the screw.

• It is recommended to mount the DJI RS Extended

Grip/Tripod for stability. Visit DJI Store for more

information.

Connection (Figure F)

1. Connect the main body module cable to the display

port of Ronin 4D

2. Connect the high-bright main monitor cable to the

display port of the gimbal connector module

3. Connect the adapter cables to the CAN ports

(connected by default)

Press and hold the power button of the Ronin 4D Flex to

power on.

Using the Pan Axis Quick-Lock (Figure G)

It is suitable to mount the pan axis quick-lock when using

a tele lens mounted on devices such as a tripod (requires

a third-party accessory).

• Make sure Ronin 4D is powered off or in sleep

mode when mounting the pan axis quick-lock.

until it clicks,

. Attach the