dji Zenmuse X5 Manual do utilizador - Página 8
Procurar online ou descarregar pdf Manual do utilizador para Acessórios para câmaras dji Zenmuse X5. dji Zenmuse X5 18 páginas. For inspire 1 pro
Também para dji Zenmuse X5: Manual do utilizador (17 páginas), Manual do utilizador (11 páginas), Manual do utilizador (18 páginas), Manual (11 páginas)
Imprimir página
ZENMUSE X5 User Manual
The Balancing Ring must be installed on the camera lens when a filter is not used.
Supported Micro SD Cards
The Zenmuse X5 comes with a 16GB Micro SD card, but also supports Micro SD cards with a
capacity of up to 64GB. We recommend using a UHS-1 Micro SD card to minimize the delay
when reading and writing high resolution video data.
DO NOT remove the Micro SD card from the Zenmuse X5 when it is powered on.
Installing the Camera Lens
The following steps use the DJI MFT 15mm f/1.7 ASPH as illustration of how to mount the
camera lens to the camera body. Be sure to power off the battery before installation.
1. Remove the camera body cap.
2. While holding down the Lens Release Button, rotate the Lens Lock clockwise to unlock it.
3. Remove the lens cap and rear cap.
4. Align the two Lens Mount Indexes on the camera body and camera lens, and insert the
camera lens into the body of the camera.
5. Rotate the camera lens clockwise until you hear a click.
6. Rotate the Lens Lock counterclockwise to lock it.
7. Mount the Balancing Ring (or a filter) and the Lens Hood.
8. Insert the Micro SD card.
8
©
2016 DJI. All Rights Reserved.
1
4
2
Lens Release Button
5
Micro-SD
Balancing Ring (or Filter)
Lens Hood
7