AIMS Power SCC-30A MPPT Manual de instruções - Página 4

Procurar online ou descarregar pdf Manual de instruções para Controlador AIMS Power SCC-30A MPPT. AIMS Power SCC-30A MPPT 6 páginas. Solar charge controller, 12v & 24v solar systems

Imprimir página

INSTALLATION

Install the charge controller near the battery(S) on a stable surface. This surface should be solid, even,

dry and nonflammable. The battery cable should be as short as possible and have a cable diameter size to

minimize loss, e.g. 4 mm² at 20 A and 6ft in length (16 AWG).

Do not install the controller in direct sunlight.

To ensure adequate airflow around the controller, allow a 4 inch clearance around the unit. The

temperature at the installation site may never fall below or exceed the maximum permitted ambient

temperature range.

Connect the individual components according to the labels on the bottom of the controller.

CONNECTION DIAGRAM (BOTTOM VIEW OF CONTROLLER)

12 Volt

24 Volt

*Recommended wire = 10 AWG high quality cable

*There are no user serviceable parts inside the charge controller. Do not disassemble or attempt to repair the unit. Contact

manufacturer.