dji OSMO ACTION Perguntas frequentes - Página 3
Procurar online ou descarregar pdf Perguntas frequentes para Controlo remoto dji OSMO ACTION. dji OSMO ACTION 4 páginas. Bluetooth remote controller
Também para dji OSMO ACTION: Manual do utilizador (16 páginas), Manual de início rápido (9 páginas), Manual do utilizador (20 páginas)
Imprimir página
Is the Osmo Action Lens Filter Cap
interchangeable?
Can Osmo Action be connected to
Bluetooth or Wi-Fi?
Can Osmo Action be mounted on a
tripod?
Is Osmo Action waterproof?
What should I do before using Osmo
Action underwater?
What should I do if Osmo Action is
damaged by water?
What microSD card does Osmo
Action support?
What accessories does Osmo Action
have?
How do I mount different
accessories on Osmo Action?
How do I clean the lens and filter
cap?
Yes. Rotate the cap to detach it from Osmo Action, and you can
exchange it for another cap or ND filter.
Yes. The device can connect to both Bluetooth and Wi-Fi.
Yes. The camera frame of Osmo Action can be mounted on a base or
tripod.
Yes. Osmo Action itself can be used at depths of up to 11 m, and it can
be used at depths of up to 60 m by using the Osmo Action Waterproof
Case.
Please insert the battery, attach the lens filter cap, and close the USB-
C cover before using Osmo Action underwater, otherwise water may
enter the device.
1. Ensure there is nothing on the battery or inside the battery
compartment, the battery is properly inserted, and both battery release
buttons are grey with neither orange tab showing.
2. Check that the USB-C cover is properly closed.
3. Ensure that the lens filter cap is intact and properly attached; replace
it with a new one if it is damaged.
4. Osmo Action is waterproof at depths of up to 11 meters. When using
it with a waterproof case, it is waterproof at depths as far down as 60
meters.
5. Do not jump into water with Osmo Action.
6. Do not use Osmo Action in hot springs.
7. Wash Osmo Action with clean water after removing it from other
liquid and let it dry naturally.
1. Remove Osmo Action from water immediately and remove the
battery;
2. Dry the surface of the camera with a clean and soft cloth. Pay special
attention to water in the battery compartment, microSD card slot, ports,
and cracks;
3. If the camera is severely damaged, contact DJI After-Sales for repair.
Osmo Action supports microSD cards with capacities of up to 256GB.
Recommended models:
Samsung EVO Plus 32GB UHS-1 microSDHC
Samsung Pro 64GB UHS-3 microSDXC
Samsung Pro Endurance 64GB UHS-1 microSDXC
Samsung Evo Plus 64GB UHS-3 microSDXC
Sandisk Extreme 16/32GB UHS-3 microSDHC
Sandisk Extreme Plus 128GB V30 A1 UHS-3 microSDXC
Sandisk Extreme Pro 64GB V30 A1 UHS-3 microSDXC
Lexar 633X 32GB UHS-1 microSDHC
Other mainstream brands with a minimum writing speed of 30MB/s or
above are also supported.
Osmo Action is compatible with the Waterproof Case, Camera Frame,
Quick-Release Base, Locking Screw, Flat Adhesive Mount, Curved
Adhesive Mount, and more. For detailed information, please visit the
DJI Online Store.
You can use the universal port on the bottom of the camera frame and
a threaded rod to connect with common sport camera accessories, or
the interface of the Quick-Release Base to connect with DJI official
accessories.
1. Dirt on the lens can be cleaned with a lens cleaning cloth. For dust in
the cracks at the edge of the lens, use a dust blower or cotton swab for
cleaning.
2. To clean water stains, oil smudges, or fingerprints on the lens, apply
a few drops of lens cleaning solution on lens tissue and use a circular
motion. Close the cap after the lens is completely dry.