dji RC Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Controlo remoto dji RC. dji RC 20 páginas.

Remote Controller Operations

Press the power button once to check the current battery level.

Press and then press again and hold to power the remote controller on or off.

The remote controller is already linked to the aircraft when purchased together as a combo. Otherwise,

follow the steps below to link the remote controller and the aircraft after activation.

1. Power on the aircraft and the remote controller.

2. Launch DJI Fly.

3. In camera view, tap

4. Press and hold the power button on the aircraft for more than four seconds. The aircraft will beep

once when it is ready to link. After the linking is successful, the aircraft will beep twice and the battery

level LEDs of the remote controller will appear on and solid.

Make sure the remote controller is within 0.5 m of the aircraft during the linking.

The remote controller will automatically unlink from an aircraft if a new remote controller is linked to

the same aircraft.

Turn off Bluetooth and Wi-Fi of the remote controller for optimal video transmission.

Fully charge the remote controller before each flight. The remote controller sounds an alert when the

battery level is low.

If the remote controller is powered on and not in use for five minutes, an alert will sound. After six

minutes, the remote controller automatically powers off. Move the control sticks or press any button

to cancel the alert.

Fully charge the battery at least once every three months to maintain the battery's health.

and select Control and then Pair to Aircraft (Link).

Low

Battery

High