dji RM220 Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Controlo remoto dji RM220. dji RM220 17 páginas.
Também para dji RM220: Manual do utilizador (10 páginas)

Imprimir página

DJI RC Motion 2 User Manual

If the battery level is low, it is recommended to use a charger that supports 5 V, 2 A output

to charge the device.

• Make sure that the default output voltage of the charger is 5 V. Excessive voltage

will damage the device.

The table below shows the battery level LED statuses during charging.

LEDs

Linking

Preparation before linking:

1. Power on the aircraft, goggles, and motion controller.

2. Open the goggles menu. Select Status and make sure that the aircraft model displayed

at the top of the menu is correct. Otherwise, select Switch from the upper right corner

of the menu and then select the correct aircraft.

3. Make sure the aircraft is linked with the goggles.

Link the aircraft with the motion controller:

5V, 2A

Battery Level

1%-50%

51%-75%

76%-99%

100%