dji O3 Air Unit Manual de início rápido - Página 5

Procurar online ou descarregar pdf Manual de início rápido para Câmara digital dji O3 Air Unit. dji O3 Air Unit 11 páginas.

Installation Guide

Upon receipt of your DJI O3 Air Unit, attach the air unit onto the aircraft before

proceeding. For a step-by-step guide to installing your device, refer to the steps

below.

1. Insert or solder the 3-in-1 cable plug into the socket or solder joints of the

aircraft flight control board.

* The cable sequence of different flight controllers may be different. It is

recommended that you check whether the cable sequence is correct before

attaching and using.

2. Mount the air unit onto the aircraft, and check whether it is installed securely.

3. Arrange the camera coaxial cable to avoid winding with other cables.

4. Fit four screws in each side of the camera module. (Note that the depth of the

screw hole is 2 mm. Make sure not to tighten the screw too much. Applying too

much pressure will snap the screw, and thereby damage the circuit or FPC within

the camera.

5. Mount the antenna module on the aircraft, and check whether it is installed

securely.

6. Arrange the cables, and secure the aircraft with screws.

Watch this

video

for the more details.