Artidor SpotLED AR-040 Series Manual do utilizador - Página 2
Procurar online ou descarregar pdf Manual do utilizador para Destaque Artidor SpotLED AR-040 Series. Artidor SpotLED AR-040 Series 6 páginas. Explosion-safe spotled
Imprimir página1.
Safety Instructions
The AR-040 SpotLED is an explosion-safe product suitable for use in hazardous areas with explosion hazard from
flammable gases, vapors, mist and dust, classified as Zone 2 or Zone 22.
This manual must be read and understood for safe use of the SpotLED. All warnings and instructions must be followed.
Installation must be carried out by personnel trained and qualified in explosion safety taking the instructions
mentioned on the equipment and in this manual into consideration. Local regulations that apply to the installation
must be followed.
Connect this equipment to the direct current supply voltage for which it is designed.
Isolate electrical power to the SpotLED before electrical installation.
The transparent lens can be electrostatically charged. Only use a damp cloth to clean the lens. Do not use
solvents.
Either decommission the SpotLED or do not use it when it is damaged.
During installation of the SpotLED national safety regulations must be observed.
Only use the SpotLED under the environmental conditions for which it is specified. Deviating environmental
conditions can contribute to damage to the equipment and may lead to possible danger to the life of the user.
Do not use the SpotLED at temperatures deviating from the specified ambient temperature range.
Follow all instructions written on the equipment and as mentioned in this manual.
Repairs may only be carried out by the manufacturer or by a person appointed by the manufacturer.
Modifications to the equipment or changes to the design are not permitted.
The product may only be used for the function for which it is designed and shall be maintained in a good and
clean condition.
If these instructions are not followed, the explosion safety of the equipment cannot be guaranteed. The equipment
could then endanger the life of the user and could cause the ignition of an explosive atmosphere. Consequently, Artidor
as the manufacturer will waive any responsibility.
2.
Description
The SpotLED combines high-performance and energy-efficiency with state-of-the-art LED technology, making it
suitable for a wide range of applications. The robust SpotLED can successfully be applied on construction sites,
transport vehicles, forklifts, lathes, or milling machines, in gardens, or for the illumination of facades; SpotLED puts
everything in the right light. The light output of the 12 Watt SpotLED is equivalent to that of a 75 Watt halogen spot.
The SpotLED is available with LED optics at an angle of 10° (spotlight), 38° (wide-angle light), or a combination of both
(work light).
Manual explosion-safe SpotLED AR-040
Issue April 2020
2 / 6