Fitnex T70 Manual de início rápido - Página 6

Procurar online ou descarregar pdf Manual de início rápido para Passadeira de corrida Fitnex T70. Fitnex T70 6 páginas.

T70

TENSIONING THE BELT

If when you plant your foot on the belt, you can feel a sliping

sensation then the belt has been stretched and is slipping over the roller.

This is normal and common adjustment on a new treadmill.

To eliminate this slipping, tighten both sides of the rear roller by turning a allen wrench

1/4 as shown above. Try the treadmill again to check for slipping.

Repeat if necessary, but NEVER TURN the roller bolt more than 1/4 turn at a time.

CAUTION:OVER TIGHTENING OF THE ROLLER WILL SEVERELY SHORTEN

THE LIFE OF THE BELT AND MAY CAUSE FURTHER DAMAGE TO OTHER

COMPONENTS.

WARNING:

*Means of disconnect must be incorporated in the fixed wiring in accordance

with the wiring rules.

Drive Belt

If you have tightened the running belt and are still experiencing a slipping sensation,

call your Steelflex Dealer. Tightening of the drive belt should only be performed

by an authorized dealer.

PAGE 5