Artillian 1RMTBXL Manual de instalação e do proprietário - Página 2

Procurar online ou descarregar pdf Manual de instalação e do proprietário para Armazenamento de ferramentas Artillian 1RMTBXL. Artillian 1RMTBXL 3 páginas. Rops mounted toolbox, x-large, 28”x13”x11”
Também para Artillian 1RMTBXL: Manual de instalação e do proprietário (4 páginas)

Imprimir página

ATTACH TO MOUNTING BAR:

1. Figure 1 shows a toolbox installed onto an Artillian

ROPS Mounted Tool Bar.

2. To install the toolbox, rotate both cam levers UP,

then place onto the Tool Bar. See fig. 2.

Note: if the Cam Lever Latches do not sit flush on the Tool Bar, one

of the clamp plates may not have been fully open. Simply remove the

toolbox, rotate the cam levers up and tilt the toolbox away from you to

ensure the clamp plates are fully open, then reinstall on the Tool Bar.

3. To secure the toolbox to the Tool Bar, rotate both

cam levers DOWN until they cam over. See fig. 3.

NOTE: For additional security, the toolbox can be locked to the Tool

Bar by inserting a padlock through the holes in the mounting bracket

where shown in fig. 3.

4. To remove the toolbox from the Tool Bar, rotate

both cam levers UP, then lift the toolbox.

FEATURES AND OPERATION

For optimal functionality, the cam lever latches are

factory assembled with some friction between the cam

lever and the housing. This ensures the cam lever

doesn't accidentally flip closed while the user attempts to

install it on the bar. If the cam levers loosen up over time,

simply tighten the nut and bolt that secure the lever to

the housing until the desired resistance on the cam lever

has been achieved.

FEATURES AND OPERATION

Fig. 1 (attaching a toolbox)

rotate both cam levers up

to install the toolbox

Fig. 2 (cam lever in the open position)

padlock holes

rotate both cam levers down

to secure the toolbox

Fig. 3 (cam lever in the closed position)

2 of 3