akkuteam VAS 5581 Manual de Instruções - Página 10
Procurar online ou descarregar pdf Manual de Instruções para Instrumentos de medição akkuteam VAS 5581. akkuteam VAS 5581 17 páginas. Hv measurement adapter
Imprimir página
Operating Instructions
HV Measurement Adapter VAS 5581
4.1 Function
The VAS 5581 high-voltage measurement adapter is a tool to
diagnose a high-voltage battery that has not been integrated into the
vehicle on-board power grid. The work instructions
of the trouble-shooting procedures published by the respective vehicle
brands of the Volkswagen Group must be observed for this purpose.
4.2 Equipment concept
The measurement adapter can be operated with the power
supply but also independently with the installed battery
(accessory, not included in the supplied contents). To do so,
verify the supplied content to determine whether the device-specific
battery is included. The use of an installed rechargeable battery
increases operational reliability.
The device can be updated and can be adapted for future
applications by means of firmware updates..
4.3 Safety
WARNING! Inappropriate operation can result in seri-
ous bodily injury and property damage. Only perform the
described functions after having read and understood the
following documents:
– operating manual
– all operating manuals for the system components, specifi-
cally the safety instructions
www.akkuteam.de
18
4.4 Intended uses
The measurement adapter is only intended for diagnostics as per the
descriptions in the trouble-shooting procedure. Any other uses are in
violation of the intended uses. The manufacturer is not liable for losses
resulting from this. The intended uses also include
– observing all instructions in the operating manual
– regularly inspecting the power cable
4.5 Power connection
The rating plate with the power supply rating is located on the housing.
The device is only designed for this voltage supply. The unit must there-
fore only be operated with the included power supply and power cable.
4.6 Startup
Remove the unit from the carrying case and check the unit for any
damage. The unit works with the installed battery (accessory, not
included in the supplied contents) but also without the battery - but in
this case only when the power supply is connected to a power outlet.
Only use a device-specific original battery!
The original battery VAS 5581/10 is available as an accessory
(Part No. A 000606, ASE-No. 109 051 00 000).
The battery is installed by loosening the 4 screws on the bottom
of the VAS 5581 HV Measurement Adapter and opening the battery
compartment by lifting the device bottom. Insert the battery and
connect the battery plug with the connector terminal that protrudes
from the intermediate unit bottom.
19
V 1.0