djpower djV PRO STAGE EFFECTS DC-1 Manual do utilizador - Página 3
Procurar online ou descarregar pdf Manual do utilizador para Equipamento de DJ djpower djV PRO STAGE EFFECTS DC-1. djpower djV PRO STAGE EFFECTS DC-1 11 páginas. C02 confetti blaster
Imprimir página1.5.2
Personal Safety
•
Always connect the product to a grounded circuit to avoid the risk of electrocution.
•
Never aim or fire the output at any person or living thing.
•
Make sure that children, unauthorised people and animals do not obtain access to the machine.
1.5.3
Mounting and Rigging
•
For safety reasons, we do not recommend mounting the product in any capacity. Operate the product while it is on the ground
only.
•
Do not situated the machine in the vicinity of a source of vibration.
•
CAUTION: When transferring product from extreme temperature environments, (e.g. cold truck to warm humid ballroom)
condensation may form on the internal electronics of the product. To avoid causing a failure, allow product to fully acclimate
to the surrounding environment before connecting it to power.
•
Do not mount the product on a flammable surface (linoleum, carpet, wood, paper, carton, plastic, etc.).
•
Do not use in a confined space. Always install the product in a location with adequate ventilation.
•
Make sure there are no freestanding objects or objects that can be damaged by the machine within the output distance. Keep
clear 5 m (16.4 ft) from the output.
1.5.4
Power and Wiring
•
Always make sure that the voltage of the outlet to which you are connecting the product is within the range stated on the
decal or rear panel of the product.
•
Make sure the power cord is not crimped or damaged.
•
Never connect this product to a dimmer pack or rheostat.
•
Never disconnect the product from power cord by pulling or tugging on the cord.
•
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from
power via breaker or by unplugging it
1.5.5
Operation
•
Do not operate this product if you see damage to the housing or cables. Have the damaged parts replaced by an authorized
technician at once.
•
Make sure there are no flammable materials close to this product while it is operating.
•
Do not cover or plug the output nozzle during operation.
•
Never carry the product by the power cord or any moving part. Always use the handles.
•
Have a relative humidity degree of no more than 90%.
•
Have a reasonably stable temperature of between -20 and 70℃.
•
Always disconnect the product from the power source before cleaning.
•
This product contains no user-serviceable parts. Any reference to servicing in this User Manual will only apply to properly
trained, certified technicians. Do not open the housing or attempt any repairs which can lead to damage or malfunction.
•
In the event of a serious operating problem, stop using the product immediately.
•
All required safety devices must be in good condition and function properly.
•
Ensure sufficient lighting of the surroundings.
•
Keep the workplace clean.
•
Do not remove any safeguards, safety caps and safety symbols.
Please note that the confetti can rub off when it comes into contact with moisture. Therefore, please only use
confetti in or on dry, non-sensitive surroundings and surfaces.We assume no liability for damage resulting from
disregard of these and other safety instructions in the operating instructions.
Keep this User Manual for future use. If you sell the product, be sure that the purchaser receives this document.
2