djpower V-3 Manual do utilizador - Página 13

Procurar online ou descarregar pdf Manual do utilizador para Equipamento de DJ djpower V-3. djpower V-3 20 páginas. Spark machine

There are 4 buttons on the wireless remote transmitter which act as triggers. Each button can be assigned to a different Spark Machine

•

V-3. You may only choose 1 dipswitch on each receiver. See the below configuration options for setting the receivers to operate with

the transmitter remote.

Mode

CH1

CH1, CH2

CH1, CH2, CH3

CH1, CH2, CH3, CH4

...

Press the button, and the Spark Machine V-3 will output spark momentarily for as long as you hold down the button (no more than 30

•

seconds). The screen display as below:

•

Release the button, Spark stops. The screen display as below:

5.5

DMX Mode & Operation

The Spark Machine V-3 works with a DMX controller.

•

Connect the product to a suitable power outlet.

•

Turn the product on.

•

Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the

product.

5.5.1

When selecting a starting DMX address, always consider the number of DMX channels. If you choose a

starting address that is too high, you could restrict the access to some of the product's channels.

DJPOWER® V-3 DMX uses 2 DMX channels, which defines the highest

configurable address to 511 to have all channels controllable.

Set the Spark Machine V-3starting address in the 001 - 512 DMX range. This enables control of up

to 256 products in the 2-channel personality.

Connect a DMX cable from the DMX output of the DMX controller to the DMX input

socket on the product, or press repeatedly "MENU" button until the LCD shows "DMX

Address". Press "▲" or "▼" to set desired DMX starting address.

DJPOWER

Dipswitches

1 = On, 2-4 = Off

1, 2 = On, 3,4 = Off

1, 2, 3 = On, 4 = Off

1, 2, 3, 4 = On

...