djpower DJV DF-V6C Manual do utilizador - Página 3

Procurar online ou descarregar pdf Manual do utilizador para Máquina de nevoeiro djpower DJV DF-V6C. djpower DJV DF-V6C 13 páginas.

1. Safety instructions

• This device is suitable for indoor use (not outdoors) only.

• Unauthorized modifications will invalidate the warranty.

• Repairs are to carry out by skilled workers only.

• Use only fuses of the same type and original parts as spare parts.

• To avoid fire and electric shocks protect the unit from rain and humidity.

Be careful with heat and extreme temperatures!

Do not place the device in a location where it is exposed to extreme

temperatures.

Operate the device only in an ambient temperature between 0°C (32°F) -

40°C (104°F). Do not expose the device to direct sunlight or heat sources.

Keep away from humidity, water and dust!

Avoid placing the device in a location with high humidity or excessive

dust. Place no liquids on or near the system.

Place the device on a firm ground!

To avoid vibrations always place the device on a firm ground.

Do not use chemicals for cleaning!

Use a clean and dry cleaning rag to remove dust. Metal parts can be

cleaned with a damped cleaning rag. Before cleaning always unplug the

device from the power supply.

If the device is not working properly!

If problems occur unplug the device from the power supply. The user should

not try to service the device independently. All repairs and service must be

performed by a qualified technician.

Take proper care with the power cord!

Never pull the power cord to disconnect the device from the power

supply, but remove the plug with plug housing in the hand. If you do not

use the device for an extended period, unplug the device from the power

supply.

ATTENTION!

Damages caused by the disregard of this user manual are not subject to

warranty. The dealer will not accept liability for any consequent secondary

failures. Only skilled workers are allowed to carry out the electrical

connections. All electrical and mechanical connections have to be carried

out according to the European safety standards.

3 / 13