dk 477-200A Manual do utilizador - Página 4

Procurar online ou descarregar pdf Manual do utilizador para Instrumentos de medição dk 477-200A. dk 477-200A 6 páginas. Digital peak programme meter

Imprimir página

Terminal connections.

Digital (AES3) input and output.
XLR – female
PUS H
2
1
3
The XLR – male connector facilitates a passive loop-through of the AES signal to other apparatus. Hence the
instrument is fitted with a switch able input termination. If the loop-through output is not being used, the switch
(positioned between the two connectors) should be in the 110 Ώ position.
Power connector.
Power is supplied through the coaxial low voltage socket. A mating connector should have an outher diameter of
5.5mm and a hole diameter of 2.1mm. Either a 24V dc or a 18V ac sypply should be used.
Remote Control.
Remote control and additional power connection is accessible through the 9pole male D-sub connector on the rear side.
Pin connections:
1
Remote control #1 (RC#1)
2
Power input (24V dc or 18V ac)
3
Supply GND
4
Remote control #3 (RC#3)
5
Overload indication output.
6
Remote control #2 (RC#2)
7
Supply GND
8
Power input (24V dc or 18V ac)
9
Remote control #4 (RC#4)
20030929
1.
Screen
2.
Digital input +
3.
Digital input -
XLR - male.
2
1
3
Document no. 477-2010A page 4 of 4
1. Screen
2. Digital output +
3. Digital output -