Custom Dynamics CD-RG-V-AW2-BB Instruções de instalação

Procurar online ou descarregar pdf Instruções de instalação para Acessórios para motociclos Custom Dynamics CD-RG-V-AW2-BB. Custom Dynamics CD-RG-V-AW2-BB 2 páginas. Road glide led vent trim

Imprimir página

Part Numbers:

CD-RG-V-AW2-B

CD-RG-V-AW2-BB

Package Contents:

- LED Vent Trim Assemblies (pair)

- 4" Wire Tie (10)

- Instructions

Fitment:

2015-2022 Harley-Davidson® Road Glide

(FLTRX), Road Glide Special (FLTRXS), Road Glide Lim-

ited (FLTRK) & Road Glide Ultra (FLTRU), Road Glide CVO

(FLTRXSE), Road Glide Ultra CVO (FLTRUSE), and 2022

Road Glide ST (FLTRXST).

ATTENTION

Please read all Information below before Installation

Warning:

Disconnect negative battery cable from battery; refer to owner's

manual. Failure to do so may result in electrical shock, injury, or fire. Secure

negative battery cable away from positive side of battery and all other positive

voltage sources on vehicle.

Safety First:

Make sure the bike is parked on a level surface and bike's me-

chanical components are cool to the touch.

Notice: This product is designed and intended for use as auxiliary lighting on

motorcycles only. This product is NOT intended to replace any original equip-

ment lighting installed on the motorcycle and should not be used for that pur-

pose. This product must be wired in such a fashion that it does not interfere

with any original equipment lighting.

Note: You will have to remove the front fairing dash and windshield in order to

complete this installation. Please refer to your manufacturer's service manual

if unsure of this procedure.

Cleaning: Take special care in cleaning the finish. Use only Alcohol or Iso-

Heet and a fine microfiber cloth to remove dirt or debris. Never use abrasive

polishes or cleaners as these can scratch the finish.

Note: Over-tightening the mounting hardware will cause the paint to chip

which is not covered under the warranty.

Questions? Call us at: 1 (800) 382-1388

We thank you for purchasing the Custom Dynamics® Road Glide

LED Vent Trim. Our products utilize the latest technology and

highest quality components to ensure you the most reliable ser-

vice. We offer one of the best warranty programs in the industry

and we back our products with excellent customer support, if you

have questions before or during installation of this product please

call Custom Dynamics® at 1(800) 382-1388.

CD-RG-V-AW2-C

Road Glide LED Vent Trim

Installation Instructions

Installation:

Remove the 4 windshield fasteners and trim. Lift the windshield up to

remove. Store the windshield in a safe place to prevent damage.

Remove the top vent. The top vent is secured to the fairing by clips.

Position yourself in the front of the motorcycle and lift straight up on the

top vent to release. (Picture 1) Store the top vent in a safe place to

prevent damage.

Locate and unplug the left and right side 4 pin turn signal harness con-

nectors. Refer to Photo #2.

M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST

02/2022