DK Digital DCR-4000 Manual do Proprietário - Página 6

Procurar online ou descarregar pdf Manual do Proprietário para Recetor para automóvel DK Digital DCR-4000. DK Digital DCR-4000 20 páginas. Stereo cd / mp3 car radio

Imprimir página

ISO connection

The car radio is fitted with an ISO connection. Please check before installation if the

necessary electrical connections in the dashboard are provided by a corresponding ISO

plug. If that is not the case, you can purchase such a plug in a car accessories store. The

wiring of the plug is printed on the respective cable sections. Connect the cables of the ISO

plug with the cables in the dashboard of your

For your orientation, please find the wiring listed

Connection A

1. 2. 3. 6.: unused

4. +12 Volt

(Memory

5. +12 Volt

control output for car aerial or

power amplifier

7. +12 Volt

operating voltage, switched by

ignition lock

ground

Connection B

1. +

Loudspeaker rear right

2. —

Loudspeaker rear right

3. +

Loudspeaker front right

4. —

Loudspeaker front right

5. +

Loudspeaker front left

6. —

Loudspeaker front left

7. +

Loudspeaker rear left

8. —

Loudspeaker rear left

Replacing the fuse

The main fuse is situated next to the ISO connection. If you cannot switch on the device in

spite of correct installation and power supply, this fuse might be blown. In this case please

replace the fuse with one of the same type. If the replaced fuse blows as well, it might be

due to a malfunction in the device. In this case please contact your dealer or the office

specified in the

guarantee.

Warning: Always replace a damaged fuse with a new fuse of the same type.

"Patching up" fuses or using a fuse allowing a higher current might destroy the device. In

addition all warranty claims will become

retention)

car.

below:

void.