Altronix eBridge1PCRX Manual de instalação - Página 3
Procurar online ou descarregar pdf Manual de instalação para Recetor Altronix eBridge1PCRX. Altronix eBridge1PCRX 4 páginas. Ip and poe+ over coax solution ebridge1pcrx receiver and ebridge1pctx hardened transceiver kit
Também para Altronix eBridge1PCRX: Manual de instalação (4 páginas)
Imprimir página
Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes
and authorities having jurisdiction. Wiring should be UL Listed and/or Recognized wire suitable for the application.
eBridge1PCTX and eBridge1PCRX are not intended to be connected to outside plant leads and should be installed
indoors within the protected premises. eBridge1PCTX and eBridge1PCRX are intended for indoor use only.
1. eBridge1PCRX installation:
a. Secure unit to desired mounting surface with a proper fastening device utilizing the unit's mounting hole
(Fig. 2a, pg. 3). Unit should be mounted in proximity to ethernet switch/network, NVR or video server.
b. Connect 24VDC to 56VDC Class 2 power supply to wire insert connector [Power – Input +]
(polarity observed) (Fig. 1, pg. 2). Use 22AWG - 16AWG wire for this connection.
c. Connect structured cable from ethernet switch/NVR (network video server) to RJ45 jack marked
[10/100BaseT] (Fig. 2, pg. 3).
d. Connect Coax cable to BNC connector marked [Coax] (Fig. 2, pg. 3).
2. eBridge1PCTX installation:
a. Secure unit to desired mounting surface with a proper fastening device utilizing the case's mounting hole
(Fig. 2a, pg. 3). Unit should be mounted in proximity of camera/device.
b. Connect structured cable from IP camera/device to RJ45 jack marked [10/100BaseT] (Fig. 2, pg. 3).
c. Connect Coax cable to BNC connector marked [Coax] (Fig. 2, pg. 3).
Note: eBridge1PCRTX is designed to accommodate Megapixel, HD720, HD1080 and VGA (SD) cameras. It is
important to note that some high resolution and high frame rate cameras may demand faster headend processing
ability, such as a PC graphics card to present a quality image. If the headend processing equipment is insufficient
in speed, the image may show pixelation and latency. It is advisable to pretest system if unsure. Alternatively,
frame rate and resolution may be reduced to accommodate system equipment.
Parameter
Connections
Input power requirements 24VDC/1,500mA, 56VDC/900mA
Indicators
Environmental Conditions
Regulatory Compliance
Weights (approx.)
Fig. 1
eBridge1PCRX
Structured
Cable from
Ethernet Switch/NVR
Coax
Cable from
eBridge1PCT
eBridge1PCRTX Installation Guide
Installation Instructions:
Technical Specifications:
Description
BNC for Coax link. RJ45 for ethernet link.
Blue:
Yellow (RJ45 connector):
Green (RJ45 connector):
Green:
Operating Ambient Temperature (UL60950-1):
eBridge1PCRX:
eBridge1PCTX:
Storage Temperature:
Relative humidity:
Operating Altitude:
UL/CUL Listed for Information Technology Equipment (UL 60950-1).
CE European Conformity. C-Tick compliant.
Product: 0.4 lbs. (0.18 kg) | Shipping: 1 lbs. (0.45 kg).
Blue LED indicates
Coax Connection
Coax Link.
On - Link, Off - No Link, Blinking - Activity.
On - 100Base-TX, Off - 10Base-T.
Power.
15W:
30W for 24VDC:
30W for 48VDC:
For 15W:
For 30W:
Green LED
indicates
Power
Structured
24VDC-56VDC
Cable from
--- Input +
IP Camera/Device
Coax
Yellow LED
Cable from
indicates
eBridge1PCR
PoE
– 20ºC to 45ºC (– 4ºF to 113ºF).
– 20ºC to 37ºC (– 4ºF to 98.6ºF).
– 20ºC to 45ºC (– 4ºF to 113ºF).
– 40ºC to 75ºC (– 40ºF to 167ºF).
– 40ºC to 49ºC (– 40ºF to 120.2ºF).
– 30ºC to 75ºC (– 22ºF to 167ºF).
85%, +/– 5%
– 304.8 to 2,000m.
eBridge1PCTX
Green LED
indicates
Power
Blue LED
indicates
Coax Connection
- 3 -