DK2 Warrior Spartan 1200 Instruções de montagem e funcionamento - Página 9

Procurar online ou descarregar pdf Instruções de montagem e funcionamento para Guinchos DK2 Warrior Spartan 1200. DK2 Warrior Spartan 1200 20 páginas. Electrical winch

Never connect the cable back to itself.
damage.
strength as shown in the illustrations.
Store the remote control inside your vehicle in a place that it will not
be damaged.
Any winch that appears to be damaged in any way, is found to be
worn, or operates abnormally SHALL BE REMOVED FROM
SERVICE UNTIL REPAIRED.
necessary repairs be made by a manufacturer's authorized repair
facility.
Pull only on areas of the vehicle as specified by the vehicle
manufacturer.
Only attachments and/or adapters supplied by the manufacturer
shall be used.
Self Recovery
Fig 3.1
Fig 3.2
Fig 3.3
Always use a snatch block, sling or chain of suitable

RIGGING TECHNIQUES

Locate a suitable anchor such as a strong tree trunk or boulder.
Always use a sling as an anchor point.
the clevis hook back onto the cable as this could cause damage to
the cable.
As shown in Fig 3.1
Do not winch from an acute angle as the wire rope will pile up
on one side of the drum causing damage to wire rope and the
winch. Fig 3.2
Short pulls from an angle can be used to straighten the vehicle.
Long pulls should be done with the wire rope at a 90° angle to the
winch/vehicle.
When pulling a heavy load, place a blanket or jacket over the wire
rope five or six feet from the hook. In the event of a broken cable it
will dampen the snap back. For additional protection open the
hood of the vehicle as shown in Fig 3.3
This will cause cable
It is recommended that the
9
CAUTION Do not attach