Artistic License Net-Lynx O/P Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Conversor de multimédia Artistic License Net-Lynx O/P. Artistic License Net-Lynx O/P 8 páginas.

Imprimir página

Jumper Configuration

There are several advanced settings, beyond
the scope of normal operation, that can be
accessed by fitting the supplied jumpers over
the configuration pins. The jumper settings
information is as follows:
JP0-2
JP3
HTTP server disabled (e.g. no web
page functionality)
JP4
10.x.x.x IP addressing active
(ignored when DHCP is active)
JP5
RDM disabled on all outputs
JP6
Inverts the low byte of the IP
JP7
ROM
Switch to boot-loader
Boot
*Factory ROM mode ready for firmware
upload. It is not usually necessary to use
this procedure as firmware uploads can be
initiated directly using DMX-Workshop.

Error Messages

On power-up, Net-Lynx O/P goes through
a number of self-checks to ensure that it is
functioning correctly. If an internal fault occurs
the indicator LEDs are used to display an error
code.
LED State
Power & All alternately
flashing
Com & All alternately
flashing
DMX 'A' & All alternately
flashing
All flashing
(informational)
**Contact Artistic Licence for advice.
Net-Lynx O/P User Guide
For future use
address
For future use
*
mode on
power cycle
Description
SRAM
Fault**
E2Prom
Fault**
System ROM
Fault**
Boot loader
mode
Net-Lynx O/P Specification
Mechanical
Housing: Desktop style case
y
Material: metal
y
Overall dimensions: 115 mm (H) x 195
y
mm (W) x 55 mm (D)
Weight: 0.7 kg
y
Mounting: Desktop or truss (requires
y
adapter)
Country of manufacture: UK
y
Environmental
Operating temperature: 0°C to 40°C
y
Storage temperature: -10°C to +50°C
y
Operating relative humidity (max): 80%
y
non-condensing
IP rating: IP20 indoor use only
y
Certification: CE, FCC, WEEE, RoHS
y
Warranty: 2-year (return to base)
y
Power & Electrical
Input voltage: 9 - 48 VDC
y
Input connector: 4-pin male XLR (1 no.)
y
Input power (max): 2 W
y
Duty cycle: 80% @ 25°C
y
DC fuse: internal resettable fuse for
y
control electronics
Ethernet
Type: 10BaseT
y
Isolation: 1 kV
y
PoE: supported
y
DMX512 Outputs
Output mode: ground referenced
y
Output isolation: n/a
y
Output ESD protection: ≥ 2 kV
y
Output voltage protection: -7V to +12 V
y
Output conditioning: slew-rate limited
y
Control
Input Protocols: Art-Net, sACN
y
Output Protocols: DMX512, DMX512
y
(1990), DMX512-A, RDM V1.0 (E1.20 -
2006 ESTA Standard)
Page 7