Customatic dreamstar CM-ABDS-A18-WWM-U-S-AC-PLBS-DR-LM Manual do Proprietário - Página 6

Procurar online ou descarregar pdf Manual do Proprietário para Mobiliário de interior Customatic dreamstar CM-ABDS-A18-WWM-U-S-AC-PLBS-DR-LM. Customatic dreamstar CM-ABDS-A18-WWM-U-S-AC-PLBS-DR-LM 18 páginas. Worldclass adjustable bed base

Imprimir página

ALL IN ONE FILE- DREAMSTAR-NEW LAYOUT_Layout 4 8/27/15 5:59 PM Page 6

The

World Class Adjustable Bed Base!

Installation Guide

STEP 1

For safety reasons, the following should be performed by 2 people.

Carefully lift the bed frame unit out of the shipping carton with the

top side facing downward.

ssembling Bed Legs

STEP 2.

For this step, you will need 4 bed legs (C ), which can be found in the

ccessories box. Turn each bed leg (C) in a clockwise direction into

the threaded holes on the frame as shown. Repeat the bed leg

assembly for all 4 legs (C) provided.

STEP 3

Remove and extend the power cord from the frame.

Important!

M KE SURE POWER CORDS DO NOT OBSTRUCT

NY DJUST BLE BED MECH NISMS.

STEP 4

Take plastic wrapping off the base frame.

STEP 5

Carefully rotate the base frame so the top side is facing upward. Be

careful not to rest the frame on its side. The weight may damage the legs.

DreamStar

DO NOT OVERTIGHTEN

THE BED LEGS.

STEP 6

Plug the power cord into a grounded electrical outlet.

NOTE :

For optimal safety, a surge protector should be

used (not supplied with this djustable Bed).

STEP 7

Install batteries in hand unit.

Try all functions on the hand control to ensure all features are

operational.

If the bed does not work, refer to Troubleshooting on p.14.

STEP 8

Return bed to flat or level position.

ttaching the "Quick-Slide"

STEP 9.

Mattress Retainer Bar

Fasten the "Quick-Slide" mattress retainer bar (B) to the foot of

the bed base using the "Quick-Slide" method illustrated below.

(No tools or screws are required)

Simply position the open ends of the Retainer Bar directly

aligned with the "Loop" Retainer nchors already installed to the

foot of the base surface. Slide the Retainer Bar forward allowing

the open ends to glide into the loop.

If the adjustable frame is to be set up without a headboard,

simply install a mattress on the frame.Installation is now complete.

If a headboard is to be installed, proceed to step 10 on next page.