CUSTOMGADZ mimicsG4 Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Leitor multimédia CUSTOMGADZ mimicsG4. CUSTOMGADZ mimicsG4 15 páginas.

6. Updating The Firmware

Firmware updates allows easy and rapid turnaround low level changes to the core MimicsG4 operating

system. Updates can include support for more devices, touchscreens and bug fixes.

To upload new firmware.

Download the latest firmware from the customGadz website. The file downloaded will be named

•

"MIMG4100.img"

Copy the file into the root directory of a USB flash disk as shown in diagram below.

•

Turn off the MimicsG4 by either unplugging the Micro USB power cable or if you have installed

•

this into a vehicle, simply turn the car off.

Plug in the USB flash disk pre-loaded with the firmware file and power the MimicsG4 back on.

•

You will notice the touch status indicator light up and then a few moments later the Bluetooth

•

status indicator will start flashing for about 10 seconds.

** Note: If after attempting to update the firmware you see the Red/blue light flashing alternatively,

make sure the file is correctly loaded on the flash disk. If your flash disk is brand new you can try to

reformat the flash disk and try again.

Pre-Loaded

USB Flash disk

Firmware update file

Bluetooth status

Touch status

Indicator