DKM Motor DSA-006-D Manual de instruções

Procurar online ou descarregar pdf Manual de instruções para Controlador DKM Motor DSA-006-D. DKM Motor DSA-006-D 2 páginas. Analogue speed controller

Imprimir página

ANALOGUE SPEED CONTROLLER

DSA Instruction Manual

We appreciate you for purchasing products of DKM Motor Co., Ltd.

Before using the product you have purchased, check to make sure

that it is exactly what you ordered. Then, Please use it following the

instructions below.

Safety Informmation

Alerts declared in the manual are classified to Danger,

Warning and Caution by their criticality

DANGER indicates an imminently hazardous situation

DANGER

which, if not avoided, will result in death or serious injury

WARNING indicates a potentially hazardous situation

WARNING

which,if not avoided, could result in death or serious injury

CAUTION indicates a potentially hazardous situation which,

CAUTION

if not avoided, may result in minor or moderate injury

DANGER

There is a danger of occurring electric shock in the input/output terminals so

please never let your body touched to the conductive substance.

WARNING

* Do not use the product in an explosive or flammable atmosphere. fire may

occur.

* Only qualified installers should be assigned to the work of installation,

connection, running, operation and inspection. This is intended to prevent

fire, electric shock and injury.

* Before starting the work, turn off the speed controller power. Otherwise,

electric shock may occur.

* Be sure to keep power input voltage of the speed controller within the rated

range.

* Electrical connections must be done under strict accordance with the

connection example.Otherwise, fire and electric shock may occur.

* After connection, mount the covers of power connection terminal and

input/output signal connection terminal. Otherwise, fire or electric chock

may occur.

CAUTION

* Do not use the motor and speed controller in excess of ratings.

Otherwise, electric shock, injury of the operator and damage of the

equipment may occur.

* Do not grip the motor output shaft or lead wires. Otherwise, injury may occur.

* Do not place combustibles around the motor and speed controller.

Otherwise, fire may occur.

* Do not put any object into the openings of the speed controller.

Otherwise, fire, electric shock or damage of the equipment may occur.

* Be sure to set the switch to the stop position before connection the power supply.

* The lower RPM setting is, the lower the motor's torque possible to use is.

If the surface temperature of the motor is more than 90 degrees depending

on the operating conditions of the motor, we recommend using at a higher

speed range than the current set speed range.

CAUTION BEFORE USING

* Before using the product you purchased, make sure that it's exactly what

you ordered.

* Ambient temperature is -10℃ ~ +40℃, ambient humidity is Max. 85%.

Avoid direct ray of light and install a cover.

* Avoid the place in vibration, deep impact, lots of dust, inflammable gas and

corrosive gas.

* Install the motor and controller as closely as possible. (2m or less)

* There is possibility of malfunction in case of parallel connection with controlled

device in high-capacity electric circuit. Please wire line with separate circuit.

* Make sure to protect the motor shaft. A tube should be on it.

* Do not catch only lead wire when it is carried. It can be snapped.

DKM Motor Co., Ltd.

Head Office / Factory

292, Yeomjeon-ro, Michuhol-gu,

Incheon Republic of Korea 22117

Tel. +82.32.574.7788 Fax. +82.32.578.7787

Controller Coding System

DKM Motor

Co., Ltd.

Speed

Controller

Analogue

Type

Characteristics

・DSA is unit type speed controller.

・It is easy to control the speed of the motor by connector motor and

controller unit as using dedicated connector and by connecting AC

terminal to power source.

・Variable speed range: 50Hz: 90~1400rpm, 60Hz: 90~1700rpm

・When the switch sets to RUN, the motor operates at the set rotation speed

and when the switch sets to STOP, motor stops.

Specification

Model

Rated volltage

AC 220~240V 50/60Hz

Ambient

voltage range

Allowable

current

Control

Range of speed

control

speed

control

Changing rate

of speed

Output

Ambient

temperature

Ambient

humidity

Insulation

Over 100MΩ(Base on 500VDC mega)

resistance

Dielectric

1500VAC 50/60 for 1minute

strength

006

006 : 6W

010 : 10W

D : AC220V 60Hz

015 : 15W

E : AC 220~240V 50Hz

025 : 25W

040 : 40W

060 : 60W

090 : 90W

120 : 120W

180 : 180W

DSA-□□□-□

±10 %

Below 5A

Phase control

50Hz : 90~1400r/min

60Hz : 90~1700r/min

Operate with volume

±5%(Standard)

6W~180W

-10C°~ 40C°

35-85%RH