Cutech 80100-CT Manual

Procurar online ou descarregar pdf Manual para Armazenamento de ferramentas Cutech 80100-CT. Cutech 80100-CT 2 páginas. Universal stand

80100-CT UNIVERSAL STAND

Place upper brace, long, inside upper leg piece .

NOTE: Upper brace has two large, oval holes in each end , these holes should be on top when leg stand

is completely assembled.

Align holes on the upper brace with the holes on the leg piece. Insert two carriage bolts and hand

tighten using hex nuts.

Place lower leg piece inside upper leg brace. Place lower brace, long, on top of both leg pieces.

Align holes on all three pieces. Insert two carriage bolts and hand tighten using hex nuts.

Attach a second upper leg piece to the outside of upper race using two carriage bolts and hex nuts.

Next , attach lower leg piece to the inside of upper leg piece placing lower brace on top of both leg

pieces ( also on the inside of the leg stand ) . Insert two carriage bolts and hand tighten using hex

nuts.

Repeat the above steps once. This completes two of the four sides of the leg stand.

Place upper brace, short, inside upper leg piece.

NOTE: Upper brace, short, has two large, oval holes in each end ; these holes should be on top when leg

stand is completely assembled .

ASSEMBLY

DESCRIPTION

Upper Brace, Long

Upper Brace, Short

Lower Brace, Long

Lower Brace, Short

Upper Leg

Lower Leg

Rubber Foot

Carriage Bolt, M8x1.25-16

Carriage Nut, M8x1.25

QTY