DKN technology 20409 Manual de início rápido

Procurar online ou descarregar pdf Manual de início rápido para Rastreadores de fitness DKN technology 20409. DKN technology 20409 2 páginas. Ble smar heart rate sensor

Imprimir página

WEARING THE TRANSMITTER

Step 1.

Slightly moisten electrode area with

some water on the textile strap. (If

necessary)

Step 4.

Make sure the electrodes are pressed

firmly against your skin. The sensor

should be centered on your chest in the

upright position.

Notice:

1. Use water, ECG gel or other conductive liquids to moisten the conductive rubber skin contact.

2. Do not use vasoline or oils which may insulate the transmitter and make it unable to detect the heart rate signals.

3. To save power please make sure to take off the transmitter when not in use.

TRANSMITTER BATTERY INSTALLMENT

Install a CR2032 battery as back side illustrated.

Step 1. Slide the battery (CR2032) at an angle as illustrated and

make sure during battery installation that the battery is first

pressed against the side contact (mark "+" facing up) and

then press into the battery compartment

Step 2. Check that the O-ring is properly positioned in battery

cover to ensure water proof protection of the battery

compartment.

Step 3. Position the battery cover and turn right to close it with a

coin (turn left to open it)

READ ME FIRST

For accurate readings and best performance, please read the following

suggestions:

★This product is intended only for the purpose of displaying heart rate

during physical activity and cannot predict the Intensity level that is safe

for you.

It is not a medical device, nor is it intended for medical diagnostic

purposes. Before you begin any exercise program, consult your

physician or doctor.

★Skin types and heart rate signals differ in people. You may need to

take some time to be familiar with the transmitter strap to achieve stable

signals.

Please be patient, especially during the cold, dry winter months.

★Dehydration and alcohol consumption can affect the detection and

accuracy of the heart rate display.

For accurate readings it is advised to wait until your body condition

stabilizes before using the transmitter.

★Body hair can affect the detection and transmission of heart rate

signals. If necessary, trim or shave chest hair where the transmitter

sensing electrodes will contact your skin.

Step 2.

Attach the Bluetooth smart transmitter to

the textile strap 2 connection buttons.

The right metal button should be on the

right side, and left to left side of the body.

Step 5.

Check the transmission of active pulse.

IMPORTANT:

1. Make the metal shell a little stick up, not flat.

2. Make sure to close the battery cover very tightly to prevent sweat and

moisture from spoiling the battery composition.

WEARING THE HEARTRATE CHESTBELT

This heart rate chest belt has a soft textile strap with adjustable buckle design.

Please adjust to proper length to get the effective heart rate detection.

Before wearing the chest belt, you may check the transmission by pressing

★

the electrode area with your fingers.

ACCESSORIES & ATTACHMENT

Heart Rate Transmitter

Textile Elastic Strap

Battery Cover (with O-ring)

CR2032 3V

Lithium Battery

Step 3.

Adjust strap length and wrap around

chest. Insert clasp to loop end. Make

sure strap is fastened on your body

properly.

Step 6.

Adjust strap length and wrap around

chest.