Alula Connect+ RE659 Manual

Procurar online ou descarregar pdf Manual para Sensores de segurança Alula Connect+ RE659. Alula Connect+ RE659 4 páginas. 360 motion sensor

360 PIR Motion Sensor

It is a commercial battery-powered ceiling mount sensor

with a 360 degree detection range.

Features

• 360° detection range with 62 distinct detection zones

• Range up to 40 feet in diameter

• Selectable pulse count 2 or 4

• Designed for commercial applications

• 5 year warranty

Enroll

by entering the serial number into the security panel.

Alternatively, the sensor can be enrolled by placing the

panel into enrollment mode, and then pulling the battery

tab or tampering the device.

Install

by screwing two #8 screws into the ceiling, leaving 1/4

inch of thread exposed. Next, slide the back plate over the

screws and rotate the back plate. Screw the third #8 screw

through the wall tamper into the ceiling, ensuring that the

wall tamper screw is attached to something solid. Tighten

all screws until snug. Then, insert the square nut into the

square slit of the cover and start threading the #4 screw into

the side of the cover. Close the cover and conduct a walk

test. After testing, take the unit out of walk test mode and

close the cover again. Finally, finish threading the #4 screw

until it is snug.

Mounting Tips

• Avoid direct sunlight

• Avoid facing directly to AC or heating vents

• Avoid vapor or high humidity

• Avoid curtains, screens, etc. from blocking detection

• Do not install outdoors

RE659 360 Motion Sensor

Connect+

alarms when motion is sensed.

Use the panel's installation guide to verify proper system setup.

Encrypted

™