AINA PTT Voice Responder Manual rápido - Página 2

Procurar online ou descarregar pdf Manual rápido para Sistema de conferência AINA PTT Voice Responder. AINA PTT Voice Responder 4 páginas. Connecting to zello
Também para AINA PTT Voice Responder: Manual rápido (4 páginas), Manual rápido (4 páginas), Manual rápido (4 páginas), Manual rápido (4 páginas), Manual rápido (4 páginas), Manual rápido (4 páginas), Manual rápido (4 páginas), Manual rápido (2 páginas), Manual rápido de emparelhamento de dispositivos (5 páginas)

Putting your PTT Voice Responder into

Kodiak-mode

Turn on the device by pressing the Power button

Then, perform a software reset by pressing and holding both soft (arrow)

buttons and both PTT buttons simultaneously, until the LED blinks once in

yellow (this step is necessary to remove any previous pairings and settings).

Turn off the device by pressing the Power button

Activate Kodiak-mode by holding down the Volume-down button, while

turning on the device by pressing the Power button for more than 3 seconds.

Successful activation is indicated by an orange LED indication instead of the

normal power on LED.

Finally, put the Voice Responder into Storage mode, by pressing the Power and

Emergency button simultaneously; after the beep, first release the Power

button and then the Emergency button. Afterwards, you can turn on your

device from the Power button as usual.

Step 2. Software reset

for more than 3 seconds.

Step 4. Toggle Kodiak-mode