Alula RE114 Manual de início rápido - Página 11

Procurar online ou descarregar pdf Manual de início rápido para Alarme de fumo Alula RE114. Alula RE114 12 páginas. Smoke alarm interlogix compatible

Imprimir página

8.7 Dust and Insect Contamination

All Smoke Alarms and particularly the

optical (photoelectric) type are prone to

dust and insect ingress which can cause

false alarms.

The latest design, materials and

manufacturing techniques have been

used in the construction of Alula's Alarms

to minimise the effects of contamination.

However it is impossible to completely

eliminate the effect of dust and insect

contamination, and therefore, to prolong

the life of the Alarm you must ensure that

it is kept clean so that excess dust does

not build up. Any insects or cobwebs in

the vicinity of the Smoke Alarm should

be promptly removed.

In certain circumstances even with

regular cleaning, contamination can

build up in the smoke sensing chamber

causing the Alarm to sound. If this

happens the Smoke Alarm must be

returned for servicing or replacement.

Contamination is beyond our control, it

is totally unpredictable and is considered

normal wear and tear. For this reason,

contamination is not covered by the

guarantee and a charge is made for all

such servicing work.

8.8 End of life

The entire Alarm must be replaced if:-

• The unit is installed for over 10 years

(check the "replace by" date marked on

the side of the unit).

Before the Alarm is safely discarded,

remove from the mounting plate &

disconnect the batteries.

Do not put the Alarm into a fire.

The Alarm should be disposed in a safe

and environmentally sound manner at

your local recycle centre. Contact your

local authority for further advise.

8. Troubleshooting

Alarms sound for no apparent reason

• Check for fumes, steam, etc. from the

kitchen or bathroom. Paint and other

fumes can cause nuisance alarms.

• Check for any sign of contamination

such as cobwebs or dust. Clean the

Alarm as described in Section 8 if

necessary.

• Press the Test/Silence button on the

Smoke Alarm causing the Alarm (this can

be identified as the Alarm with the red

light flashing rapidly) – this will silence

the Smoke Alarm for 10 minutes (and

also silence all other interconnected

Alarms in the system).

The Alarm fails to sound when the Test

button is pressed

• Check the age of the unit - see the

"replace by" label on side of unit.

• If necessary replace the battery or

batteries with Panasonic CR123A

9. System Compatibility and

Wireless Verification

Smoke alarm model RE114 has only been

evaluated at ETL with Interlogix Simon

XTi Model#: 600-1054-95R-12

Test the system after finishing installation,

enrollment, and configuration. Refer the

panel's manual for instructions on testing

the system.