Artone TVB Manual do utilizador - Página 4
Procurar online ou descarregar pdf Manual do utilizador para Adaptador Artone TVB. Artone TVB 6 páginas.
Imprimir página2.4 Pairing in RX mode
1. Ensure the TVB is set to RX mode and
that the device is off.
2. Connect the TVB to your non- wireless
audio receiving device (like stereo system
etc.).
3. Power On the TVB.
4. Activate the wireless function on your
transmitting device (like smartphone or
tablet etc.)
and search for the nearby
wireless devices.
5. Find the "Artone-TVB" in the search
results and tap on it to connect.
2.5 Pair in RX mode with two
devices simultaneously
In RX mode the pairing with two wireless
devices can be performed at the same time.
1. Pair the TVB with your 1
the previous instructions.
2. Disable the wireless function on your 1
device. Tap the Power Button twice to pair with
st
the 2
device.
3. Turn on the wireless function on the 1
device.
4. In approximately 10 seconds, the first
device will automatically connect. If automatic
connection fails, press the connect button on
your device.
st
device, using
st
st
Note
• The TVB will enter pairing mode
automatically when powered on for the first
time.
•
The TVB can remember previously
paired devices and will attempt to pair with
devices automatically, without going into
pairing mode.
• Pairing mode will last 2 minutes. The
receiver will enter standby mode if no
devices can be connected within 2 minutes.
Attention
•
The original pairing memory will be
removed after a mode switch.
•
If a PIN code is required for pairing, try
0000, 8888, 1111, 1234.
Note
• Only one device can play music at a time.
You have to stop the music on one device to
play on the other.
• When the TVB is powered on, it will
automatically reconnect with the last connected
device.
3. FAQs
1. The Artone TVB doesn't turn on.
Please charge it.
2. Problems with pairing to a receiver.
Please, make sure the following:
• the wireless stereo receiver supports A2DP
profile.