DLAB Laboratory Instruments DM0412S Manual do utilizador - Página 10
Procurar online ou descarregar pdf Manual do utilizador para Equipamento de laboratório DLAB Laboratory Instruments DM0412S. DLAB Laboratory Instruments DM0412S 18 páginas. Clinical centrifuge
Imprimir página
7. Operation
CAUTION
If the centrifuge makes strange noise during operation, stop it immediately and contact our service
center.
7.1 Start the operation
Turn on the power, waiting the display screen light up.
Press the speed button to do the speed adjusting.
Press the time button to do the time adjusting(set up time more than 60 seconds, the "MIN" light will
be light up. Less than 60 seconds, the "SEC" light will be light up ).
Press the "RUM/STOP" button, starting the centrifuge.
7.2 Stopping the centrifuge
The centrifuge will be stop running when set up time is out.
Press the "RUN/STOP" button to shut down the centrifuge.
Open the hatch door during the centrifuge is running, the centrifuge will braking and stop,
8. Maintenance
8.1 Cleaning
CAUTION
If do not follow the recommended instructions for cleaning or disinfecting this may damage the
centrifuge.
（1）Centrifuge
If the centrifuge is exposed to ultraviolet rays for a long time, the color of the door may be changed or
the label may be peel off. After using, cover the centrifuge with a piece of cloth to protect it from
direct exposure.
If the centrifuge needs cleaning, clean it with a cloth or sponge moistened with a neutral detergent
solution.
Sterilize the centrifuge by wiping with a cloth moistened with 70% ethanol solution.
（2）Rotor chamber
8