ARTronic ART 600VA Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para UPS ARTronic ART 600VA. ARTronic ART 600VA 12 páginas. Line interactive ups

5. Installation and Operation

1. Inspection

Remove the UPS from its packaging and inspect it for damage that may

have occurred during shipping. If any damage is discovered, repack the

unit and return it to the place of purchase.

Charging

This unit is shipped from the factory with its internal battery fully charged,

however, some charge may be lost during shipping and the battery

should be recharged prior to use. Plug the unit into an appropriate power

supply and allow the UPS to charge fully by leaving it plugged in for at

least 8 hours with no load (no electrical devices such as computers,

monitors, etc.) connected.

Placement

Install the UPS unit in any protected environment that provides adequate

airflow around the unit, and is free from excessive dust, corrosive fumes

and conductive contaminants. Do not operate your UPS in an

environment where the ambient temperature or humidity is high. On the

other hand, place the UPS away from the monitor at least 20cm to avoid

interference.