DLI DLM-4 ZONE Manual - Página 15

Procurar online ou descarregar pdf Manual para Controlador DLI DLM-4 ZONE. DLI DLM-4 ZONE 19 páginas.

Imprimir página

7.13 Hot-start Prevention

If power is interrupted to the DLM-4, the unit will restart the lights after

a 15 minute time delay to allow the lamps to cool before re-starting.

Each successive zone re-start will be preceded by a 5 second delay in

order to reduce electrical startup surges / loads. During the 15-minute

delay, the DLM-4 will show the time remaining until the lights will be

re-started, (turned On).

*NOTE:

In order to minimize start-up load or high power "spikes", after

a power outage each one of the 4-zones will be re-started sequentially.

After the first zone re-starts, a 5-second "cascading timer" delay will

begin for each of the remaining 3-zones to turn back on 1 at a time.

Zone 1

1000W70.7F

1000W

Day

Zone 2

---.--F

Restrike

14.31

Zone 3

---.-F

Restrike

14:31

Zone 4

---.-F

Restrike

14:31

01/19/17

*NOTE:

While the time delay is counting down, the Zone status menu

will display the time remaining, before the lights are allowed to re-

strike.

DLM-4 ZONE

Controller

7.14 Dimming and

High-temperature Shut Down

The DLM-4 Zone Controller has the ability to monitor the temperature

of 4-separate zones. The user can select their desired dimming and

high-temp shut down (Stop At) settings within the zone settings.

Dim at setting:

rises too high, the lights connected (assigned) to that zone will be

dimmed to reduce the temperature inside the growing area.

Stop at setting:

At" temperature setting is reached, the lights within that zone will be

turned off.

*NOTE:

the temperature is reduces by 2'C / 3.6'F below the dimming and the

Stop At setting. (The dimming or high-temp shutdown event will be

stored in memory within the error log menu.

Dimming start

04:41:25pm

03/08/2017

Temp: 70.8F

ENTER to Return

*NOTE:

If the temperature of any of the zones being monitored

If the temperature continues to rise, and the "Stop

The zones will return to normal operation automatically once

Zone 1

To return to the Zone status menu, press the Enter button.

DLM-4 ZONE

Controller