ALUZ A1-ZYZY-SQR Manual de instruções de instalação - Página 4
Procurar online ou descarregar pdf Manual de instruções de instalação para Equipamento de iluminação ALUZ A1-ZYZY-SQR. ALUZ A1-ZYZY-SQR 11 páginas.
Imprimir páginaZYZY
Square
A1-ZYZY-SQR
FEED POINT ASSEMBLY (Exploded View)
Splice Connector
(By Others)
Conduit Fitting
(By Others)
Flexible Conduit
(By Others)
CONTINUOUS CONNECTIONS (Dry or Damp Location Only)
1
Arrange luminaire segments in desired pattern.
Example: 22'4" (8' + 8' + 6'4")
8'
Luminaire Disconnects
Hardwire Connector
(ALS500T-SMR-HWC)
Splice Connectors or Wire Nuts
(By Others)
Flexible Conduit
(By Others)
2
Connect disconnects between luminaire segments.
8'
Connect Hardwire Connector
disconnects, then place into luminaire housing
3
Push luminaire segments together and snap into mounting plates.
Note: Refer to Mounting Plates page for details on mounting.
8'
Secure conduit to luminaire using Conduit Fitting (By Others)
Driver
(Included)
Bottom Cap
(Included)
8'
Continuous Run Disconnects
8'
Connect disconnects between fixtures,
then push together leaving no gaps
22'4"
8'
6'4"
ALUZ
1170 North Red Gum Street, Anaheim, CA 92806
Phone: 800 921 2254 or 714 535 7900 | Fax: 714 535 7902 | [email protected] | aluz.lighting
© ALUZ All rights reserved. ALUZ reserves the right to make changes or withdraw specifi cations without prior notice.
FEED POINT ASSEMBLY (Assembled View)
• Installer must drill a hole in the Bottom Cap to access driver wiring. Make wiring
connections through hole to conduit (by others), secured with a conduit fi tting
rated for the application (by others).
Note: Size, style, and location of conduit and conduit fi tting to be determined by
installer. Remove bottom cap before drilling. Do not use Mounting Plate holes for
conduit. Ensure conduit fi tting will not interfere with driver or Mounting Plates.
Always use outdoor rated hardware for Wet Located rated luminaires.
• A conduit feed point is required at the beginning of each Dry Location run.
• A conduit feed point is required for each Wet Location luminaire.
• Luminaires may be daisy chained up to max run length.
6'4"
ALS500T-SMR
6'4"
Installation Instructions
9 / 1 / 2021 / Rev 0
Page 4 of 11
Configurations