Alva AOH202-11 Manual de início rápido - Página 9
Procurar online ou descarregar pdf Manual de início rápido para Aquecedor Alva AOH202-11. Alva AOH202-11 13 páginas. Oil heater
Imprimir páginaUSING YOUR HEATER
1. Before using the heater, make sure that it is on a level and
stable surface, to prevent damage or a hazardous situation.
2. Set all the controls to OFF position and insert the plug into a
socket-outlet. Be sure that plug fits firmly.
3. Rotate the thermostat knob to the MAX position (Fig 1).
4. Set the timer ON/OFF switch to ON position (Fig 3).
5. Switch on the Power Switch for the heater to start. The pilot
light on the power switch will illuminate (Fig 2).
- Switch I for low heat
- Switch II for medium heat
- Both switches for high heat III
6. When your room reaches the desired temperature, slowly
rotate the thermostat knob counter clockwise until the pilot
light goes out. The thermostat can now be left at this setting.
As soon as the room temperature has dropped below the set
temperature, the unit will switch itself on automatically until
the set temperature has been reached again. In this way the
room temperature remains constant with the most economical
use of electricity.
7. If you want to change the room temperature setting, rotate the
thermostat knob clockwise to raise the temperature, or counter
clockwise to lower it.
8. This heater includes an overheat protection system that shuts
off the heater when parts of the heater becomes excessively
hot.
9. To completely shut the heater off, turn all the controls to OFF,
and remove plug from the socket-outlet.
Fig. 1
Fig. 2
5
OPERATION OF THE
HEATER
NOTE: It is normal when the
heaters are turned on for the
first time, or when they are
turned on after having not
been used for a long period
of time, the heaters may
emit some smell and fumes.
This will disappear when the
heater has been on a short
while.
Before using the heater,
make sure you understand
the "IMPORTANT SAFETY
INFORMATION"
section of this manual.
Fig. 3