Alva eph62 Manual de instruções - Página 2
Procurar online ou descarregar pdf Manual de instruções para Aquecedor Alva eph62. Alva eph62 17 páginas. Infrared heater with telescopic stand
Imprimir páginaIMPORTANT SAFETY INFORMATION
As with all appliances, misuse of this appliance or failure to
fully follow these instructions may cause fire, injury or death.
Please read all the instructions before using your heater.
If you have any doubt or concerns about this appliance's
installation, please consult a qualified electrician.
•
Before using this appliance check that the voltage indicated
on the type plate corresponds to your mains supply voltage.
•
Ensure that the heater has been securely fastened to the
mounting /installed securely. This heater can only be used
in a fixed position.
•
The distance of your appliance from the ceiling is a minimum
of 0.7m
•
The appliance must be placed 1meter away from a person.
•
Please ensure that there is always a method for disconnection
from the mains supply. Having a contact separation in all poles
is required and must be incorporated in the fixed wiring, in
accordance with the wiring rules.
•
DO NOT use this heater with a programmer, timer or any other
device that switches the heater on automatically. There is a fire
risk if the heater is covered or positioned incorrectly.
•
The fireguard on this heater is intended to prevent direct
access to heating element and must always be securely in
place when the heater is in use.
•
The protective grid does not give full protection for young
children or infirm persons.
•
Always disconnect the heater from the electricity mains
when not in use, during installation, cleaning and/or heating
element replacement.
•
When replacing the heating element, always ensure it has been
allowed to cool for at least 30 minutes.
•
The heating element is sensitive. Do not handle it with bare
hands. If it is inadvertently touched, always remove finger prints
with a soft cloth and alcohol before use.
•
Always ensure that the power cord is kept away from the body
of the heater. The heater body will get very hot while in use and
can melt the cable.
•
Always inspect the power cord for signs of wear or damage.
If wear or damage is noted, a suitably qualified person should
replace it immediately. Failing to do so is a hazard and may
lead to fire and/or electrocution/electric shock and/or property
damage and/or death.
•
NEVER allow the cord to come into contact with wet or hot
surfaces or become twisted.
•
DO NOT damage and DO NOT kink the power cord.
•
DO NOT cover or obstruct the heater when in use.
•
DO NOT insert any objects through any slot or opening
in the heater.
•
Users must not disassemble the heater, or change/substitute
any parts of this heater; if the heater is faulty it is extremely
dangerous to use it.
Please read the
instructions carefully
before use.
Retain this manual for
future reference.
This appliance must
not be modified in
any way - doing so is
illegal and will make
the appliance unsafe
as well as cancel your
warranty.