Alvarion BreezeNET RB Manual de instalação rápida - Página 6
Procurar online ou descarregar pdf Manual de instalação rápida para Ponto de acesso sem fios Alvarion BreezeNET RB. Alvarion BreezeNET RB 9 páginas.
Imprimir página3. In the RB, rotate the antenna until the maximum SNR reading is
achieved, where at least 1 green LED is on: If you encounter
prolonged difficulty in illuminating the minimum required number
of green LEDs, try to improve the reception quality by placing the
antenna at a higher point or in an alternate location. You may
need to repeat the process at the side of the BU, using the Link
Quality Indicator (in Telnet).
4. Ensure that the front of the antenna is directed towards the other
unit. However, in certain conditions, such as when the line of site
to is hampered, better reception may be achieved using a
reflected signal. In this case, the antennas are not always
directed each other.
5. Secure the unit firmly to the pole.
Verifying Proper Operation
1. Once you have connected the unit to an Ethernet outlet, verify
that the green Ethernet connectivity indicator is on, blinking
whenever the unit receives or transmits traffic on the Ethernet
port.
2. Verify data connectivity by pinging the other unit or by connecting
to the Internet.
3. To verify proper operation of the outdoor and indoor units, view
the LED indicators:
Name
POWER
ETH
PS1073 Indoor Unit LEDs
Description
Power Indication
Self test and end-
to-end Ethernet
connectivity
indication
Functionality
Green – IDU power is OK.
Off - No power or power
failure.
Off – No Ethernet
connectivity has been
detected between the
outdoor unit and the device
connected to the indoor unit.
Green– Self-test passed and
Ethernet connection
confirmed by the outdoor unit
(Ethernet integrity check
passed). Blinking whenever
there traffic on the Ethernet
port.
- 6 -