DM Accessories AIS-CUBE Instruções de montagem e utilização - Página 2
Procurar online ou descarregar pdf Instruções de montagem e utilização para Adaptador DM Accessories AIS-CUBE. DM Accessories AIS-CUBE 2 páginas. Active interface shoe to universal shoe adapter
Imprimir páginaOpen the AIS cover
Mounting Accessories
Slide the accessory device into the shoe, then tighten securely with hand force only. Shown is a
Bescor LED light on the AIS-CUBE.
Adjustment
If the tension on the adapter is too loose or too tight, use the enclosed adjustment washers. They are
made of varying thicknesses of plastic to adjust the tension under the shoe mount. Follow the
instructions on the washer packet. If the adapter is to be semi-permanent, consider using a drop of
low or medium strength, service removable, thread locking liquid on the threads of the shoe mount.
Be careful not to use too much thread locking liquid or spill it. Thread locking liquid can be found at
auto parts stores.
Maintenance
Clean with a soft cloth, dry or lightly damp if the adapter gets dirty. If using any liquids, be sure that
the adapter is completely dry before attaching it to the camera again. Do not use harsh cleaners.
Parts
Should any of the parts get lost or damaged, please email
on getting replacement parts.
Adapter design and instructions ©2006-07 DM-Accessories. Adapter and camcorder compatibility list
is not necessarily an endorsement of any particular brand or product.
All trademarks and copyrights are property of their respective owners.
Insert 'H' base into the AIS
socket. Shown as bare base
for illustration, disassembly is
DM Accessories
4833 Cherry Valley RD
Middleville MI 49333
USA
not needed.
http://www.dm-accessories.com
Slide forward. Turn
the top clockwise and
tighten by hand only.
Top is not shown.
for information