AKO AKO-55120 Manual rápido - Página 2

Procurar online ou descarregar pdf Manual rápido para Sistema de segurança AKO AKO-55120. AKO AKO-55120 2 páginas. Trapped person alarm

Imprimir página
Configuration
The unit is supplied as ready-to-use; not configuration is required.
Operation
Without alarms
The input indicators are green.
Alarm active
The station emits an alarm sound, shows the affected input(s) in red, the general
alarm indicator lights up and the visual alarm flashes.
Wiring error/malfunction
The station emits 3 short beeps every two minutes and the input indicator
affected flashes red.
Alarm tones:
Trapped person alarm: Bitonal sound.
Ÿ
Wiring error/malfunction: 3 short tones every 2 minutes.
Ÿ
Relays
See table enclosed
Status
Alarm relay
With power supply
Battery connected
NO
With power supply
Battery disconnected
NO
Without power supply/
NO
With battery
Without power supply/
Without battery
NO
Without power supply/
Without battery
NO
Detector/
NO
wiring fault
In the event of a power failure, the alarm will continue to work until
the batteries run out.
Maintenance
Clean the surface of the unit with a soft cloth, water and soap.
Do not use abrasive detergents, petrol, alcohol or solvents, as this might damage
the sensor.
Description
C
NC
C
NC
C
NC
C
NC
C
NC
C
NC
Input indicator
Power supply status
AKO-5512x
ALARM
Alarm display
Acoustic alarm
Visual alarm
Green constant: Trapped person in cold room store
push-button.
Red flashing quickly: Malfunction/wiring fault in
trapped person push-button.
Red flashing slowly: Push-button not detected or
disconnected.
Red constant: Trapped person alarm active.
Green constant: Power supply at 230 V/120 V
Red flashing: Power supply to battery
Visual alarm 2
Acoustic alarm 2
Alarm display 2
ALARM
Alarm display 1
Acoustic alarm 1
Visual alarm 1
General alarm indicator
Fixed: Alarm active.
Flashing: Malfunction/wiring fault in push-button.
Battery status
Green constant: Battery connected
Switched off: Battery disconnected
AKO-55323