aion Cadmus Manual de início rápido - Página 4

Procurar online ou descarregar pdf Manual de início rápido para Pedal de música aion Cadmus. aion Cadmus 9 páginas. Dual-stage boost

BUILD NOTES

MOSFET selection and pinouts

The original Super Duper uses BS170 MOSFETs, which is what this layout is designed for. These are

identical in specification to the 2N7000, but the 2N7000's pinout is reversed. If using the 2N7000,

rotate it 180 degrees from the orientation shown on the PCB silkscreen.

R23, C18 and C19

The initial run of Cadmus PCBs had a few parts on the PCB mislabeled as follows.

• C5 (main board) is labeled C18. It should be 100uF.

• C6 (footswitch board) is labeled C19. It should be 100n.

• R8 (footswitch board) is labeled R23. It should be 100R.

The PCB diagram on page 1 shows the correct numbering, as well as the schematic on the next page.

CADMUS DUAL BOOST