aion ACHILLES Manual de instruções - Página 2

Procurar online ou descarregar pdf Manual de instruções para Equipamento de música aion ACHILLES. aion ACHILLES 10 páginas. Amp overdrive

aion ACHILLES Manual de instruções

TABLE OF CONTENTS

1 Project Overview
2 Introduction & Usage
INTRODUCTION
The Achilles Amp Overdrive is based on the Analogman Prince of Tone, the single-channel adaptation
of the King of Tone that was first released in 2012. Unlike the King of Tone, the Prince was designed
for mass production and is assembled in China. As a result, it's much more affordable as well as being
readily available (the King of Tone has a 4 ½-year waiting list).
The Prince of Tone converts the internal diode DIP switch into an external toggle switch, allowing for
soft clipping, hard clipping or no clipping to be selected without needing to open up the back. It also has
the high gain mod from the King of Tone as standard.
Internally, in addition to the Presence control, there are two DIP switch settings that are new to this
pedal. One of them adds low-mid frequencies to the first gain stage. The other is called "Turbo" mode
that essentially doubles the gain of the second stage, meaning it reaches the clipping threshold sooner
and has more apparent drive on tap.
The Achilles is a direct clone of the Prince of Tone with no modifications.
USAGE
The Achilles has four external controls:
• Drive controls the amount of gain going into the op-amp feedback diode clipping stage.
• Tone controls the treble response via a passive filter.
• Volume controls the overall output.
• Clipping (toggle switch) selects between soft clipping (overdrive), hard clipping (distortion) and no
clipping (clean boost).
There are also three internal controls:
• Presence (trimmer) is an additional passive treble control. The default position is all the way down
(full CCW) and as you turn it up it adds high-end. Noise or hiss will increase as well.
• +Mids (DIP switch) adds low-mids to the signal by increasing the filter frequency of the first op-amp
gain stage.
• +Gain (DIP switch) doubles the gain ratio of the second op-amp stage so that the diodes clip more
easily.
ACHILLES AMP OVERDRIVE
11 Licensing
2