DNF Controls MAV-555 Manual do utilizador - Página 13

Procurar online ou descarregar pdf Manual do utilizador para Placa de rede DNF Controls MAV-555. DNF Controls MAV-555 20 páginas. 250 clip fast access system with peripheral bus interface option sony dp protocol for sony mav-555 video servers

Imprimir página
b.

RECEIVE CUELIST FUNCTION

The RECEIVE CUELIST function allows you to receive your list of Cue Points from a
PC or from another ST300. Transfer to a PC requires OpSuite 3.0 software, which runs
on a Windows-based computer. Contact DNF Controls for more information.
1)
2)
13 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option
TO RECEIVE CUE POINTS FROM THE ST300
a)
Connect the VTR4 connector on the back of the ST300 from the VTR4
connector of the transmitting ST300 using RS422 9-pin cable with TX
and RX lines crossed. (A "Turnaround" Cable)
b)
Press [MENU] and scroll the wheel to "Receive CUE List?
YES=Enter, Exit=ESC."
c)
Press [ENTER] to start receiving. The Display shows "Waiting to
receive."
d)
When the Transmitter is ready, transfer starts automatically.
The Display now shows "Receiving cuelist."
e)
After the transfer is over the display shows "Done-Success! Press any
key..."
f)
Press any key. The display shows "Receive cuelist?" message.
g)
Press [ESC] to exit the MENU mode.
TO RECEIVE CUE POINTS FROM THE PC
a)
Connect the VTR4 connector on the back of the ST300 to one of the
COM ports on the PC using RS422 to RS232 adapter.
b)
Repeat steps b-g of the TO RECEIVE CUE POINTS FROM THE
ST300 section.