Aion Electronics EQUINOX Manual - Página 7
Procurar online ou descarregar pdf Manual para Pedal de música Aion Electronics EQUINOX. Aion Electronics EQUINOX 10 páginas.
DRILL TEMPLATE
Cut out this drill template, fold the edges and tape it to the enclosure. Before drilling, it's recommended
to first use a center punch for each of the holes to help guide the drill bit.
Ensure that this template is printed at 100% or "Actual Size". You can double-check this by measuring
the scale on the printed page.
Top jack layout requires the use of closed-frame jacks like the
not fit in layouts with 5 or more knobs due to the placement of the DC jack.
LED hole drill size assumes the use of a
size accordingly if using something different, such as a 3mm bezel, a plastic bezel, or just a plain LED.
INCH
0
1
CM
0
1
2
EQUINOX AMP OVERDRIVE
5mm LED
bezel, available from several parts suppliers. Adjust
125B
0.625"
0.625"
ø3/8"
ø1/2"
OUT
DC
TREBLE
MID
x: -0.775, y: +1.71
x: 0, y: +1.71
ø9/32"
ø9/32"
VOLUME
CLIP
x: -0.775, y: +0.41
x: 0, y: +0.41
ø9/32"
ø1/4"
CENTER (0,0)
LED
FOOTSWITCH
x: -0.775, y: -1.20
x: 0, y: -1.20
ø5/16"
ø15/32"
Switchcraft
111X. Open-frame jacks will
ø3/8"
IN
BASS
x: +0.775, y: +1.71
ø9/32"
GAIN
x: +0.775, y: +0.41
ø9/32"
7