BLUE CHIP Adapt Pro Elite Manuallines de operação e manutenção - Página 2
Procurar online ou descarregar pdf Manuallines de operação e manutenção para Equipamento médico BLUE CHIP Adapt Pro Elite. BLUE CHIP Adapt Pro Elite 2 páginas.
Imprimir página
MAINTENANCE
Pump
1. Wash hands and place gloves on hand.
2. Place pump, hose on decontamination table or counter.
3. Spray with disinfectant. Do not use phenol based disinfectants.
4. Wipe down pump and hose
5. Let pump and hose dry for approximately 15 minutes.
Mattress
1. Wash hands and use gloves.
2. Place mattress on decontamination table or counter.
3. Spray with a Quaternary disinfectant. Do not use phenol based disinfectants.
4. Wipe down top of mattress with towel and let sit for approximately 15 minutes.
5. Turn mattress over and repeat the cleaning process.
6. Let the mattress hang dry in a well-ventilated area between 12 - 24 hours.
7. Covers can be removed and washed in a gentle cycle using disinfectants.
8. Put in dryer only in spin cycle to remove excess moisture, do not use heat.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSES
Mattress Not Inflating
1. No Power
2. CPR Valve opened
3. Air Rail or Hoses Kinked
4. Hose not connected to pump
Power Failure
1. Power Surge
2. Blown fuse
3. Power cord is not plugged in
Pump Not Inflating
1. Pump in standby mode
2. Not responding to mode
3. Filter is dirty
4. Excess Noise
Blue Chip
Medical Products Inc.
ACTION
1. Check plug in outlet, check fuse
2. Twist to close position
3. Check that hoses are not impeded
by bed rail or other obstruction
1. Turn power switch off then on
2. Change fuse
3. Plug power cord into outlet
1. Press operate button, select
auto firm, or alternate mode.
2. Turn Power switch on then off
to reset.
3. Remove filter located under the
carry handle of pump. Vacuum
or rinse under water to remove
excess dust.
4. Return for authorized technical
service.
7-11 Suffern Place, Suffern, NY 10901
Toll Free: 800 795-6115 • Fax: 845 369-7633
Website: www.bluechipmedical.com
MAINTENANCE
Pump
1. Wash hands and place gloves on hand.
2. Place pump, hose on decontamination table or counter.
3. Spray with disinfectant. Do not use phenol based disinfectants.
4. Wipe down pump and hose
5. Let pump and hose dry for approximately 15 minutes.
Mattress
1. Wash hands and place gloves on hand.
2. Place mattress on decontamination table or counter.
3. Spray with Madacide or other disinfectants. Do not use phenol based disinfectants.
4. Wipe down top of mattress with paper towel and let sit for approximately 15 minutes.
5. Turn mattress over and repeat the cleaning process.
6. Let the mattress hang dry in a well-ventilated area between 12 - 24 hours.
7. Covers can be removed and washed in a gentle cycle using disinfectants.
8. Put in dryer only in spin cycle to remove excess moisture, do not use heat.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSES
Mattress Not Inflating
1. No Power
2. CPR Valve opened
3. Air Rail or Hoses Kinked
4. Hose not connected to pump
Power Failure
1. Power Surge
2. Blown fuse
3. Power cord is not plugged in
Pump Not Inflating
1. Pump in standby mode
2. Not responding to mode
3. Filter is dirty
4. Excess Noise
Blue Chip
Medical Products Inc.
ACTION
1. Check plug in outlet, check fuse
2. Twist to close position
3. Check that hoses are not impeded
by bed rail or other obstruction
1. Turn power switch off then on
2. Change fuse
3. Plug power cord into outlet
1. Press operate button, select
auto firm, or alternate mode.
2. Turn Power switch on then off
to reset.
3. Remove filter located under the
carry handle of pump. Vacuum
or rinse under water to remove
excess dust.
4. Return for authorized technical
service.
7-11 Suffern Place, Suffern, NY 10901
Toll Free: 800 795-6115 • Fax: 845 369-7633
Website: www.bluechipmedical.com