Dobinsons BU19-3542 Manual de instalação - Página 8

Procurar online ou descarregar pdf Manual de instalação para Acessórios para automóveis Dobinsons BU19-3542. Dobinsons BU19-3542 14 páginas. Bullbar ford ranger px mk 2

Imprimir página

20. Once cut, remove the burrs from the edges

and re-install the bumper to the vehicle.

21. Reinstall the bumper and grill fasteners as

well as the grill cover and fasteners.

22. Install the LH and RH triangular bracket

supports first on the outside of each chassis

rails as per page 4 diagram. The LH bracket

can also be bolted at the back.

23. Install the bullbar mounting bracket. Bolt the

small flat brackets (item 14) from the inner

part of the main bracket to the radiator plastic

deflector. Use the original cross beam bolts on

the main bracket and drill through the plastic

and use the bolts nuts and washers item 10

supplied for the plastic section.

24. Ensure the bracket is central to the vehicle

and tighten all nuts and bolts.

Dobinsons Springs and Suspension

25. Install the lower original bash plate supports

(item 13) ready for fitment to the o.e. bash

plate later.

26. Carefully un-wrap the bulbar taking care not

to scratch it especially on the top loops.

Reinstall the number plate to the bullbar as it

is easier now. If installing driving lights to the

bullbar it is easiest to install now.

27. If not installing a winch skip to step 35

28. See the Installation section of your Dobinsons

4x4 Winch manual for specific detailed fitting

instructions. For a brief overview see the

following steps.

29. Test fit your winch to the mounting bracket

and do up loosely with the clutch handle on

the left hand side of the vehicle.

30. This may require the clutch handle and gear-

box housing to be rotated forward one or 2

bolt holes to allow easy access through the

bulbar holes. See instructions in winch user

manual.