eSYNiC NWP6 Manual do utilizador

Procurar online ou descarregar pdf Manual do utilizador para Repetidor eSYNiC NWP6. eSYNiC NWP6 2 páginas. Wifi-repeater

Imprimir página

WiFi-Repeater

User Manual

WPS

REV.3.2

A4. Type the username and password in the login page,the default username and

password are both

admin

.Click Submit button to continue.

A5. After loging in the management page,PLS select the Repeater mode, Click

on the

Repeater

Button

to continue.

eSYNiC - Wifi Repeater

展开尺寸: 3 6 0 x 2 4 0 m m

成品尺寸: 1 2 0 x 9 0 mm

Introduction：

The eSYNiC Wi-Fi Repeater boosts your Wi-FI signal and extends the range of your

wireless network to areas of your home that previously had little or no signa.

Extend Network-Extend Internet access throughout your home for wireless devices

like iPads ,laptops ,smart phones ,game consoles and TVs.

Enhance Existing Equipment -keep your current equipment and improve coverage to

eliminate wireless "dead zones".

Power Indicator

Wireless Indicator

WPS Indicator

RJ45 Port

LAN Indicator

Reset

WPS Button

Package Contents

Before you starting to use this repeater, please check if there's anything missing in

the package, and contact your dealer of purchase to claim for missing items:

· 1 x Wireless-N Repeater

· 1 x RJ-45 Networking Cable

· 1 x Quick installation Guide

NOTE:

If you need to

reset

the Wi-Fi Repeater, you need press and hold the reset

button inside the tiny hole for

seconds till all the LED indicator reflash

eSYNiC - Wifi Repeater

A6. Select your current w

ireless

router SSID to continue,if you can not find your wifi

router,PLSrefresh and try it again.

A7.

When you get the page below, please do NOT change the repeater

SSID,just input your current wifi security key and continue

Click on 'Apply' button, The Repeater will restart.

Wait for a few seconds,your Wi-Fi Repeater is ready for use.

*We suggest that your current wifi Security Key should not included strange symbol

such as $ *& ^,it might lead to a fail configuration,Character and Number

recommended.

eSYNiC - Wifi Repeater

INSTALLATION

The latest eSYNiC wifi Repeater Support TWO typical Mode ,Wireless Repeater mode

and Wireless AP mode ,You can select the proper mode depends on your network

environment

Wireless Repeater Mode

In the wireless repeater mode ,the eSYNiC wifi Repeater will expend the wifi

coverage of your current wifi network and enhance the strength of the wifi signal .

No any wired connection required to your Router or broadband ,extend

the wifi signal wirelessly .

Wireless AP Mode

This AP model is wireless Access

Point (AP) in which it can convert

signal into wireless wifi signals.

Application:

Connect the eSYNiC wifi repeater to the

wired broadband interface (or wired router at

home)with RJ45 network cable,you will create

a new wifi hot port,and full wifi coverage in

your home

eSYNiC - Wifi Repeater

A8.Wireless Repeater mode configure successfully

*The default wireless SSID and Security key of WI-FI Repester is same as your

AP/router after successful installation.

* The Management Page will be locked after you successful configuration,You

can NOT login the management page via the http://192.168.10.1, If you want to

to make all setting become factory default setting .and reconfiguration the wifi

repeater again.

B. Configure the repeater mode with Rj45 Cable.

1. Plug the eSYNiC wifi Repeater to a wall socket. Connect the repeater to your

PC/Laptop via RJ45 network cable included.

2. Follow process A3 to A8 to configure your Wi-Fi Repeater.

eSYNiC - Wifi Repeater

How to configure the Wi-Fi Repeater

You can configure the

sSYNiC

wifi Repeater via RJ45 network cable included Or

wirelessly on your PC/Laptop

A. Configure the Repeater Mode wirelessly.

A1. Plug the Wi-Fi Repeater to a wall socket.

A2. Click the network icon (

) on

the right bottom of your desktop ,You will find

the signal from the

eSYNiC

Repeater .Click on

"Connect" and wait for a few seconds

A3.Open the web browser and type the Default

IP address

http://192.168.10.1

in the address

bar,the default IP address for this eSYNiC wifi

Repeater is

192.168.10.1

,and then press Enter

to continue.For better compatibility,we

recommend using the Microsoft IE browser .

Note:

If you can NOT Load the management page

http://192.168.10.1

on your browser

.PLS hold the reset button for 5-8 seconds until all LED indicators re-flash ,then

remove the eSYNiC wifi repeater from power socket and retry step A1 to A3 again .

eSYNiC - Wifi Repeater

C. Configure the Wireless AP Mode.

1. Plug the Wi-Fi Repeater into a wall socket.

2. Follow process A3 to A4.

3. Click on 'AP' to continue.

4.The following message will be displayed on your web browser:

eSYNiC - Wifi Repeater